Wide HARD TAIL up to 200 tire
Frame stretch 2 1/2"
Approximately 4" of ground clearance depending on what tire you use.
DOES NOT require removing your engine! This hardtail bolts on to your bike on the bottom through the rear engine/transmission mounts to help align it, and welds onto the top AND the bottom via a set of curved gussets that fit your frame and it also welds together behind the battery box. VERY STRONG. Cheaply made Chinese hardtail kits you see elsewhere bolt only to your transmission on the bottom and only weld on the top. You have the welder fired up to weld the top, why not weld the bottom too! You can with our kit! CNC cut gussets come with the hardtail section that flow with the curve of your frame for a perfect fit and easy weld. This is MUCH stronger than just bolting it! The lines are perfect on this hardtail, with the top tubes flowing at the perfect angle to compliment the rest of the bike. These are made IN HOUSE by us! The frames are made from 1 1/4" D.O.M. Tubing. The frame stretches the wheel base approximately 2 1/2" and will fit up to a 200 tire! . Approximately 4" of ground clearance depending on what tire you use. We can supply you with an axle for this application.
**NOTE: This is just the hardtail frame.**
NOTE: If your scooter has a 4 speed transmission availability of an offset sprockets for a 200 rear tires is very limited.
- Item #: r6cwidehardtail