Panhead

 
 
1 - 223 of 223 items
"Round Series" Mirrors 1-3/4" Over-The-Transmission "S" Drag Pipes for 48-64 Panhead
"Round Series" Mirrors1-3/4" Over-The-Transmission "S" Drag Pipes for 48-64 Panhead
"Round Series" mirrors are completely chrome-plated with stainless steel pivots and mirror head screws Feature a tapered design with triangular cutouts along with textured recessed areas that may be painted to match the bike Head diameter is...Three-piece 40" slash-cut design Front 'squish' pipe fits inside the frame, and the rear pipe fits over the transmission Slider channel on the rear pipe Will not work with FLH battery Made in the U.S.A. NOTE: Additional mounting clamps may be...

$35.95

$226.95

7" Classic Side Mount Headlight Assemblies for Panhead 7" Side Mount Headlamp Shell for Panhead
7" Classic Side Mount Headlight Assemblies for Panhead7" Side Mount Headlamp Shell for Panhead

Add great-looking style to any bike Include a 60/55W H4 bulb 61/2" between fork ear mounting points Available in chrome or gloss black shells with chrome bezels

Includes rim and retainer Accepts most 7" sealed beam lights (sold separately) Available in black, chrome or carbon finish

$44.95

$56.95

Floorboard Mounting Kit for 48-65 FL/FLH Lucas Style 7" Side Mount Headlight Shells for Panhead
Floorboard Mounting Kit for 48-65 FL/FLHLucas Style 7" Side Mount Headlight Shells for Panhead
Has all required hardware for mounting driver floorboards to the mount brackets Includes four shouldered bolts and four locknutsFaithful reproduction of the classic Lucas headlamps from the 50s and 60s Available in chrome, gloss black and carbon fiber; all have a chrome rim Complete with a bottom hole in the back of the shell for wire routing Measures 63/4" between...

$5.95

$36.95

Number 13 Shifter Ball for 48-65 Panhead, 36-47 Knuckle/Flathead Round Sissy Bars for 58-65 FL, FLH
Number 13 Shifter Ball for 48-65 Panhead, 36-47 Knuckle/FlatheadRound Sissy Bars for 58-65 FL, FLH

Made from high-quality casting resin with colors that will not wear or scratch off 21/8" diameter Solid brass fittings with 1/2"-20 threads Comes with 3/8"-16 brass adapter For any shifter utilizing either of these fitting sizes

All sissy bars are constructed from 9/16" solid steel Side plates are a bolt-on design - no drilling required 10.1" tall and 8.75" wide Bars are measured from the first bend to the top of the bar Bars and side plates sold separately; part...

$41.95

$81.95

Short Square Sissy Bars for 58-65 FL, FLH Side Mount Lightweight Headlamp Brackets for Panhead
Short Square Sissy Bars for 58-65 FL, FLHSide Mount Lightweight Headlamp Brackets for Panhead

All sissy bars are constructed from 9/16" solid steel Side plates are a bolt-on design - no drilling required Chrome bar is 10.14" tall and 8.75" wide Gloss black bar is 10" tall and 8.75" wide Bars are measured from the first bend to the top of...

Purpose built and made from stainless steel and aluminum for great looks and longevity Built in dampening rubbers to help isolate headlamp Will work on 35mm to 41mm fork tube outer diameters Sold in pairs

$86.95

$34.95

Side Plates for Sissy Bars for 58-65 FL, FLH Tall Square Sissy Bars for 58-65 FL, FLH
Side Plates for Sissy Bars for 58-65 FL, FLHTall Square Sissy Bars for 58-65 FL, FLH

Side plates are a bolt-on design - no drilling required Bars and side plates sold separately; Sissy bars part # r6c1501-0493-0500/3 and r6c1501-0494-0501 Available in chrome Made in the U.S.A.

All sissy bars are constructed from 9/16" solid steel Side plates are a bolt-on design - no drilling required 14.75" tall and 7.75" wide Bars are measured from the first bend to the top of the bar Bars and side plates sold separately; part...

$99.95

$95.95

Top End Gasket Set for 48-65 FL/FLH Universal Folding Footrests
Top End Gasket Set for 48-65 FL/FLHUniversal Folding Footrests

Made from high-quality casting resin with colors that will not wear or scratch off 21/8" diameter Solid brass fittings with 1/2"-20 threads Comes with 3/8"-16 brass adapter For any shifter utilizing either of these fitting sizes

4" rubberized footrests provide comfort and grip Include 3/8" mounting bolts Sold in pairs

$59.95

$28.95

Universal Frisco Tank Mount Kits Universal Headlight Mounting Brackets for Panhead/Knucklehead
Universal Frisco Tank Mount KitsUniversal Headlight Mounting Brackets for Panhead/Knucklehead
Include a pair of custom laser-cut mild steel plates, rubber isolation grommets and aluminum or brass decorative tophat washers as well as 5/16" chrome button-head Allen bolts Steel plates can be welded to the backbone of any custom motorcycle...

High-quality cast aluminum construction Sold in pairs with adapters to fit 35mm, 39mm and 41mm fork tube outer diameters Available in polished aluminum or satin black finishes

$54.95

$39.95

.38 Special Valve Stem Caps 12-Point Lifter Base Screws for 48-65 Panhead
.38 Special Valve Stem Caps12-Point Lifter Base Screws for 48-65 Panhead

Styled to match .38 Special ammo Available in chrome or gold finish Sold in pairs

Chrome-plated finish Sold in sets of eight Made in the U.S.A.

$10.95

$10.95

12V Mini Dual-Fire Ignition Coils 12V Regulator for 65 FL, FLH
12V Mini Dual-Fire Ignition Coils12V Regulator for 65 FL, FLH
Improves overall performance including starting, stops, high-speed misfires, and increases mileage 30,000V output Peak spark voltage increases by at least 20% Smaller case for easier concealment, approximately 27/8" W x 23/4" T x 31/4" D Available with black bodyVibration-resistant internal wire connections, fiber and Mylar® insulating pads and large-diameter contact surfaces Made in the U.S.A.

$49.95

$63.95

12V, 5 OHM/Points Ignition/Dual Fire Ignition Coil 13.5" Chrome 412 Series Standard Shocks for 58-65 Panhead
12V, 5 OHM/Points Ignition/Dual Fire Ignition Coil13.5" Chrome 412 Series Standard Shocks for 58-65 Panhead
Increases peak spark voltage by 20% or more Improves starting, stops high-speed misfires, increases mileage and overall performance 30,000V-40,000V output 2" on-center mounting holesManufactured from the finest materials available Designed specifically for Harley models 412 Series steel spring shocks are nitrogen gas-charged with multi-stage automatic valving and an adjustable spring preload; proven under extensive testing;...

$56.95

$348.95

4" Spotlights 4-1/2" Spotlight
4" Spotlights4-1/2" Spotlight
Steel shell with a chrome finish Mount in place of OEM spotlights using included stud Available with a visor-style trim ring or deep-dish trim ring Include H3 55W bulb ECE approved (not DOT certified) Sold each

Available in a late style with a stud mount or in an early style with a swivel mount Includes H3 12V 55W bulb DS-280029 includes a blue indicator light DOT and ECE approved For replacement sealed beams and bulbs, see page ??? Sold each

$49.95

$49.95

4-1/2" Spotlight with Visor 4-Speed Gear Sets for 48-65 Panhead
4-1/2" Spotlight with Visor4-Speed Gear Sets for 48-65 Panhead
Includes chrome visor, rim, housing with blue indicator light, 55W H3 halogen bulb, swivel mount and wiring; sold each Not DOT certified or ECE approvedGears are made from high-nickel alloy steel, heat-treated and shot-peened to give maximum durability and strength Where applicable, drive dogs have milled lead-in ramps to improve shifting and reduce wear Sets include gears, shifter dogs and...

$50.95

$640.95

4-Speed Transmission Rebuild Kit for 48-65 Panhead 6-Volt Coil for 48-60 Panhead
4-Speed Transmission Rebuild Kit for 48-65 Panhead6-Volt Coil for 48-60 Panhead

Features JIMS transmission parts and gasket set Includes standard size race, snap rings, clips, shift shaft, countershaft, seals and bushings; does not include bearings Made in the U.S.A.

Available in black or chrome Includes spark plug wires Replaces OEM #31604-48 Spark plug wire also available separately

$283.95

$69.95

6V, 1.3 OHM/Points Ignition/Dual Fire Ignition Coils 7" Hydra Glide Style Headlight Assembly
6V, 1.3 OHM/Points Ignition/Dual Fire Ignition Coils7" Hydra Glide Style Headlight Assembly
Increases peak spark voltage by 20% or more Improves starting, stops high-speed misfires, increases mileage and overall performance 30,000V output Available in black or chrome bodyChrome reproduction of the original Hydra Glide headlight Available with a 12V H-4 bulb; meet DOT specifications Headlights do not have a high beam indicator light

$52.95

$75.95

8.8MM Spark Plug Wire Set for 65 Panhead (copper core) 8MM Custom Colored Plug Wires 65 FL/FLH w/coil adjacent oil tank
8.8MM Spark Plug Wire Set for 65 Panhead (copper core)8MM Custom Colored Plug Wires 65 FL/FLH w/coil adjacent oil tank
Constructed with silicone throughout the jacket to deliver high-temperature resistance Rated at SAE Class E J2031 with a continuous operating temperature of 450°F Copper core wires for use on bikes with magneto- or points-style ignitions Made in the U.S.A.Designer plug wire sets come in distinctive, highly visible colors Precut and have the plug/coil boots and terminals already installed Boots and wires are made from extra-high-temperature silicone, which gives protection up to 600°F Spiro-Pro...

$19.95

$28.95

Advance Unit Assembly for Distributor Ignitions Axle Nut Lock Plate for 48-65 Panhead
Advance Unit Assembly for Distributor IgnitionsAxle Nut Lock Plate for 48-65 Panhead

A complete advance unit assembly includes all items shown

 

For 48-65 Panhead w/aftermarket distributor

  • Chrome finish
  • Sold each
  • Made in the U.S.A.

$47.95

$6.95

Batter Cable Kits for 65 FLH, FL Battery Pad
Batter Cable Kits for 65 FLH, FLBattery Pad
4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility Increase starter performance by supplying maximum battery current to the starter motor Contain all...1/8" low-density neoprene with pressure sensitive, removable liner on one side that exposes the adhesive for contact Pad is oversized so it can be trimmed into a top or bottom pad to fit all applications Can be cut into irregular shapes for anti...

$39.95

$2.95

Battery Terminal Kit for 48-65 Panhead Battery Top Cover for 65 FLH
Battery Terminal Kit for 48-65 PanheadBattery Top Cover for 65 FLH
Add a look of authenticity with these reproduced battery terminal fasteners and felt washers Made in the U.S.A.

Chromed replacement battery top cover fits precisely and features vibration-absorbing cushions

$14.95

$23.95

Bezel/Lens Kit for FL-Style Speedometers Bottom-Mount Headlight Bracket for 49-65 FLH
Bezel/Lens Kit for FL-Style SpeedometersBottom-Mount Headlight Bracket for 49-65 FLH
This kit includes a bezel ring, rubber sealing gasket and glass lens that allows you to install new parts when reassembling your speedometer Fits all Drag Specialties, OEM and most aftermarket FL-style speedometersChrome-plated bracket Mounting holes measure 21/2" on center Made in the U.S.A.

$12.95

$38.95

Braided Spark Plug Wires 65 FL/FLH (w/coil adjacent to oil tank) Brake Drum Wheel Mounting Socket Screw Set for 48-65 Panhead
Braided Spark Plug Wires 65 FL/FLH (w/coil adjacent to oil tank)Brake Drum Wheel Mounting Socket Screw Set for 48-65 Panhead
The industry’s best braid is available in Sterling Chromite®, Polished Stainless, metallic red and metallic blue Braid perfectly matches all other Magnum cables and brake lines High-voltage, high temperature 8mm silicone ignition wire...Reproduction of hardened 3/8"-20 bolts Complete with chip curls at bottom of the socket hole Parkerized and hardened Made in the U.S.A.

$60.95

$24.95

Brake Drum/Sprocket Set for 63-65 Panhead-- 51T Brake Line T-Junction Plugs
Brake Drum/Sprocket Set for 63-65 Panhead-- 51TBrake Line T-Junction Plugs

Chrome rear drum and 51T sprocket set

  • Repl. OEM #42311-58
  • Sold Each

$259.95

$1.95

Brake Line T-Junctions for 58-65 FL, FLH Brake Rods for Rear Brake Linkage 48-57 Panhead
Brake Line T-Junctions for 58-65 FL, FLHBrake Rods for Rear Brake Linkage 48-57 Panhead
Rear T-junction with two side inverted flares, center inverted flare and bottom 1/8" NPT for 51-54 servi-car; 58-65 FL, FLH Repl. OEM #83566-51 Chromed rear brake line T-junctions fit Drag Specialties' "make-your-own" lines Replace non-chrome stock junctions Sold Each
  • High-quality OEM replacements
  • Chrome finish

$12.95

$9.95

Brake/Clutch Pedal Pad Assembly for 65 FL Breather Separator Plate and Screen for 48-65 Panhead
Brake/Clutch Pedal Pad Assembly for 65 FLBreather Separator Plate and Screen for 48-65 Panhead

Larger, easier-to-use pedal

Exact OEM replicas Screen and plates are sold separately 5-pk Made in the U.S.A.

$14.95

$3.95

Cable Clamp Cam Bearing for 58-65 Panhead
Cable ClampCam Bearing for 58-65 Panhead
  • Chrome "L" clamp routes brake, speedometer or throttle cables
  • Sold each

Cam Bearing for 58-65 Panhead

Sold Each

$7.95

$8.95

Cam Cover Bushing for 48-65 Panhead Cat Eye Dash and Base Plate
Cam Cover Bushing for 48-65 PanheadCat Eye Dash and Base Plate

Cam Cover Bushing for 48-65 Panhead

Sold Each

Chromed Cat Eye dash cover and zinc-plated base Plate is for custom applications on 66-84 Shovelhead Dash cover and base plate sold separately Base plate for 66-84 OEM tanks and Fat Bob-style tanks

$19.95

$39.95

Chrome Clevis Pin Kit for 48-65 Panhead Chrome Horns
Chrome Clevis Pin Kit for 48-65 PanheadChrome Horns
  • Replaces brake clevis pin and hardware
  • Kit contains chrome clevis pin, chrome washer and chrome cotter pin

12V horns emit loud (113 dB) signal 4" diameter; universal mount Sold each

$2.50

$24.95

Chrome Kickstand Kit for 48-65 Panhead Chrome Kickstands for 48-65 Panhead
Chrome Kickstand Kit for 48-65 PanheadChrome Kickstands for 48-65 Panhead

Complete kit includes a one-piece polished chrome mount with spring tab, kickstand, leg stop, spring and nut

High-strength steel kickstands with a brilliant chrome finish Replaces OEM kickstands perfectly Overstock kickstand lengths are for bikes with longer suspension than stock Understock kickstands are for bikes with lowered suspension NOTE:...

$69.95

$52.95

Chrome Rear Master Cylinder for 58-65 FL(drum brake/DOT 5 fluid) Chrome Saddlebag Support Brackets for 58-65 FLH
Chrome Rear Master Cylinder for 58-65 FL(drum brake/DOT 5 fluid)Chrome Saddlebag Support Brackets for 58-65 FLH
  • Complete rear master cylinder assembly
  • Polished and chrome-plated
 
Chrome-plated steel brackets hold throw-over saddlebags away from the brake caliper and swingarm Fasten to a shock absorber's upper studs or fender struts All necessary mounting hardware included Sold in pairs

$89.95

$54.95

Chrome Shock Top Caps Chromed Dimmer Switch for 48-65 FL
Chrome Shock Top Caps Chromed Dimmer Switch for 48-65 FL

For 58-64 FL; 65 FL & FLH w/o saddlebag guards For all swingarm Harleys with stock shocks 3/8" longer than stock for a better fit Come with polished stainless steel clamps, screws and nuts Sold in pairs

  • Chromed handlebar dimmer switch
  • Sold individually

$27.95

$12.95

Circuit Breaker and Voltage Regulator Screw Kit Circuit Breaker Shaft Kit for 48-65 Panhead
Circuit Breaker and Voltage Regulator Screw KitCircuit Breaker Shaft Kit for 48-65 Panhead
For 48-64 Panhead OEM screws and washers reproduction Chrome- or cad-plated Made in the U.S.A.
  • Circuit breaker shaft kit consists of a shaft and two replacement bushings
  • Made in the U.S.A.

$8.95

$36.95

Clear Fuel Filters Clutch Cable Support Bracket
Clear Fuel FiltersClutch Cable Support Bracket

Glass filters feature chrome ends Available in two inlet sizes: 1/4" or 5/16" i.d., and in two lengths: mini (1-3/8") and standard (2-3/8")

Chromed steel clutch cable support mounts in the stock location and provides clean routing for trouble-free action Sold individually

$10.95

$7.95

Clutch Hub Lining for 48-65 Panhead Clutch Hub Nut for 48-65 Panhead
Clutch Hub Lining for 48-65 PanheadClutch Hub Nut for 48-65 Panhead

Complete with rivets

High-quality steel construction Sold individually Made in the U.S.A.

$6.95

$9.95

Clutch Hub Nut Seal Kit for 65 Panhead Clutch Lever Assemblies for 65 Panhead
Clutch Hub Nut Seal Kit for 65 PanheadClutch Lever Assemblies for 65 Panhead

Clutch hub nut oil seal kit from Genuine James Gaskets

Repl. OEM #38604-65A Complete clutch lever assemblies Available in chrome or polished finish 7/16" cable opening Use OEM replacement lever

$8.95

$14.95

Clutch Release Disc for 48-65 Panhead Clutch Release Lever for 48-64 Panhead
Clutch Release Disc for 48-65 PanheadClutch Release Lever for 48-64 Panhead
  • Sold each
  • Made in the U.S.A.
  • Chrome-plated steel
  • For use with tin primary applications

$39.95

$24.95

Clutch/Brake Cable Anchor Pin and Bushings for 65 Panhead Coil Mounting Stud Kit for 56-65 Panhead
Clutch/Brake Cable Anchor Pin and Bushings for 65 PanheadCoil Mounting Stud Kit for 56-65 Panhead

Replacement cable anchor pin and plastic bushings for early-style clutch and brake levers

Kit features two studs; OEM #72341-56A, two nuts; OEM #7753, four internal star lock washers; OEM #7127 and two flat washers; OEM #6702 Cad-plated Made in the U.S.A.

$3.95

$11.95

Comfort Grip Lever Connecting Rod Races for 48-65 Panhead
Comfort Grip LeverConnecting Rod Races for 48-65 Panhead
Chrome-finished lightweight aluminum lever features an offset in the lever for easy operation Clutch/Brake lever for all 65 clutch controls or brake control on 65 FL repl. OEM #45024-65A Sold Each
  • Set of three
  • Made in the U.S.A.

$13.95

$31.95

Crankpin Assembly for 48-52 Panhead Crankpin Assembly for 48-56 Panhead (74" Motors)
Crankpin Assembly for 48-52 PanheadCrankpin Assembly for 48-56 Panhead (74" Motors)
  • Include crankpin, nuts and key
  • Made in the U.S.A.
  • Include crankpin, nuts and key
  • Made in the U.S.A.

$119.95

$119.95

Crankpin Assembly for 48-65 Panhead (+.001") Crankpin Nut/Lock Kit for 48-65 Panhead
Crankpin Assembly for 48-65 Panhead (+.001")Crankpin Nut/Lock Kit for 48-65 Panhead
  • Include crankpin, nuts and key
  • Made in the U.S.A.
  • Includes nuts, locks and screws, OEM #s 23966-54A, 23971-78, 2660
  • Made in the U.S.A.

$119.95

$33.95

Custom Regulator Mount for 48-65 Panhead Custom Round 6-Volt Coil for 48-60 Panhead
Custom Regulator Mount for 48-65 PanheadCustom Round 6-Volt Coil for 48-60 Panhead

Allows the regulator to be mounted down and back out of sight Highly chromed aluminum gives a great custom look Requires two 1/4"-20 x 1/2" bolts for installing regulator mount and two 3/8"-16 x 23/4" bolts for installing mount to the frame...

  • Features a universal mounting bracket
  • Includes spark plug wires
  • Available in black or chrome

$49.95

$49.95

Custom Valve Stem Caps Cutch Springs and Retainer for 48-65 Panhead
Custom Valve Stem CapsCutch Springs and Retainer for 48-65 Panhead
Distinctively anodized valve stem caps Available in four different colors to spruce up your wheels Sold in pairs Made in the U.S.A.Spring retainer prevents clutch drum from forcing the spinning discs together when the clutch is disengaged, leaving room for the discs to spin freely Reduces grabbing and gives smoother shifting and longer clutch life Fits models with belt or chain drive primaries

$3.95

$15.95

Dash Cover Mounting Screw and Stud Kit for 48-65 Panhead Dash Gasket
Dash Cover Mounting Screw and Stud Kit for 48-65 PanheadDash Gasket
Features a chrome-plated center screw without a choke cable hole Kit includes center screw washer, mounting base stud, lockwasher and locknut Made in the U.S.A.
  • Replacement dash gasket
  • Universal applications

$22.95

$15.95

Dash Panel for Fat Bob-Style Tanks for 48-65 Panhead Daytona Sport Solo Seat for 64-65 FL
Dash Panel for Fat Bob-Style Tanks for 48-65 PanheadDaytona Sport Solo Seat for 64-65 FL
Dash panel cover is finished in chrome and covers the gap found on 31/2- and 5-gallon Fat Bob-style tanks Fits custom conversions and FX models with split tanks, as well as FL and FLH models with seats that don't use a front pivot seat bar...Unique Le Pera seat features a low, sleek style while retaining back support for maximum rider comfort Made with a molded one-piece foam foundation and covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate Carpeted...

$18.95

$237.95

Deluxe Gas Caps Drag Specialties Conventional Battery Kit for 48-64 FL/FLH
Deluxe Gas CapsDrag Specialties Conventional Battery Kit for 48-64 FL/FLH
One-piece, die-cast gas cap is completely chrome-finished and features Nytrel/cork seals Vented with a check ball valve to prevent leakage Fits any tank using pre-83, early-type twist-on gas cap (will not fit screw-in type tanks)

Harley-Davidson OEM #66006-29F Drag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as OEM batteries Rugged and provide more cranking power over standard batteries Lead calcium alloy...

$18.95

$78.95

Drag Specialties Conventional Battery Kit for 65 FL/FLH Dual 12V Electric Horns
Drag Specialties Conventional Battery Kit for 65 FL/FLHDual 12V Electric Horns

Yuasa Reference # YHD-12 Harley-Davidson OEM #66007-84 Drag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as OEM batteries Rugged and provide more cranking power over standard...

Chromed twin horns with a relay Produces sound levels comparable to those of a semi tractor horn (approximately 107 dB) 12V horn fits all motorcycles and comes with all necessary mounting hardware Sold in pairs

$89.95

$42.95

Engine Skid Plate for 48-65 Panhead 4-Speed Five-terminal ignition switch for 48-65 panhead
Engine Skid Plate for 48-65 Panhead 4-SpeedFive-terminal ignition switch for 48-65 panhead
  • A polished stainless steel version of the OEM painted skid plate
  • Mounting hardware not included

Replacement ignition and light switch with lock for Fat Bob-style dash panels Meet or exceed all OEM specifications Includes two flat keys

$32.95

$29.95

Foot Brake Lever and Bracket Mounting Kits for 49-65 Panhead Footboard Hinge Bolt Kit for 49-65 Panhead
Foot Brake Lever and Bracket Mounting Kits for 49-65 PanheadFootboard Hinge Bolt Kit for 49-65 Panhead
Kits include two 3/8" bolts, OEM #4293; two 3/8" lockwashers, OEM #7045; one 7/16" lockwasher, OEM #7055; one 7/16"-20 nut, OEM #7831 Available with parkerized or cadmium-plated finish Made in the U.S.A.Kit includes four shoulder bolts, OEM #50635-14; with nuts, OEM #7691W; and lock washers, OEM #7691W Available with a cadmium or parkerized finish Made in the U.S.A

$5.95

$13.95

Fork Boots for 48-65 Panhead Fork Slider Covers for 49-65 FL, FH
Fork Boots for 48-65 PanheadFork Slider Covers for 49-65 FL, FH
Keep dirt and dust out of the fork seals to ensure long fork life Black molded rubber fork boots replace worn stock boots; sold in pairsGloss Black or Chrome Steel construction Available stock length (6.5") repl. OEM #45964-86 or +2" and +4" longer versions Sold as a set NOTE: Always check slider covers for proper clearance. NOTE: Bottom area of slider covers may need to be formed slightly to clear lower legs and fender.

$5.95

$42.95

Fork Tube Caps for 49-65 FL, FLH Forward Controls for 58-65 FL
Fork Tube Caps for 49-65 FL, FLHForward Controls for 58-65 FL
High-quality OEM replacement components Chrome finish Upper fork tube caps will not work w/headlight shroud; repl. OEM #45754-60 Lower fork tube cap repl. OEM #45776-49 Upper fork tube caps sold in pairs Lower fork tube caps sold eachUpdated forward controls come complete with brake and shift forward controls Chrome-plated mounts and hardware; come complete with O-ring footpegs Will not work with engine guards Requires custom brake line Forward controls includes 3/4" master cylinder- Kelsey-Hayes

$19.95

$539.95

Front Fork Damper Set for 49-65 FL/FLH Full Rear Fender for Rigids     49-57 Panhead
Front Fork Damper Set for 49-65 FL/FLHFull Rear Fender for Rigids 49-57 Panhead
Meets or exceeds OEM specifications Consists of one each of the following: lock nut (repl. OEM #7725), damper tube (repl. OEM #46100-48), and small gasket (repl. OEM #46111-48) Two sets required to rebuild the front end

Stock replacement rigid rear fender Features OEM beaded side skirt and smooth flip section for stock or custom taillights Also includes chain splash shield NOTE: Also works on all Paughco replacement rigid frames.

$59.95

$215.95

Gas Caps for 48-65 Panhead Gas Tank Shut Off Valve Extension Knob for 48-65 Panhead
Gas Caps for 48-65 PanheadGas Tank Shut Off Valve Extension Knob for 48-65 Panhead
Replacement gas caps for OEM and custom tanks, available with or without a vent Cast aluminum construction Available in chrome, gloss black and matte black finishesBeautifully chrome-plated accessory Allows easier operation of shut off valve Made in the U.S.A.

$7.95

$10.95

Gas Valve for 48-65 Panhead Gear-Side Pinion Shaft Nut for 54-65 Panhead
Gas Valve for 48-65 PanheadGear-Side Pinion Shaft Nut for 54-65 Panhead
Shut-off rod and seat assembly; features a left tank reserve NOTE: Fits earlier models if Linkert gas line is changed to 48-65 style.
  • 5/8"-24 left-hand threads
  • Sold each
  • Made in the U.S.A.

$33.95

$16.95

Generator Cover for 58-65 Panhead Generator End Cover for 58-65 Panhead
Generator Cover for 58-65 PanheadGenerator End Cover for 58-65 Panhead

Chromed to add a custom look to any generator

Features die-cast construction with a smooth chrome finish

$24.95

$14.95

Generator Gear Oil Deflector for 48-57 Panhead Generator Pole Shoe Screw Kit for 58-65 Panhead
Generator Gear Oil Deflector for 48-57 PanheadGenerator Pole Shoe Screw Kit for 58-65 Panhead
  • Sold each
  • Made in the U.S.A.
  • Kit includes two Parkerized pole shoes with screws
  • Made in the U.S.A.

$7.95

$13.95

Generator Relay for 48-57 Panhead Genuine Super Nut for Mainshaft
Generator Relay for 48-57 PanheadGenuine Super Nut for Mainshaft
  • 6-volt design
  • Includes a chrome cover
For 48-64 Panhead (open or closed primary), 65 Panhead (open primary only) Only James Gaskets' Super Nut™ improves the sealing ability on all transmission shafts at an affordable price Helps avoid transmission oil leakage from main drive gear bushing wear Sold individually

$56.95

$36.95

Half-Moon Floorboards for 48-65 FL Hazard Flasher Relay for 65 Panhead
Half-Moon Floorboards for 48-65 FLHazard Flasher Relay for 65 Panhead

High-quality replicas of OEM floorboards

Sold in pairs

OEM replacement 12V hazard flasher relay

$59.95

$6.95

Heavy-Duty Clutch Springs for 48-65 Panhead Heavy-Duty Coil Bracket for 65 Panhead
Heavy-Duty Clutch Springs for 48-65 PanheadHeavy-Duty Coil Bracket for 65 Panhead
  • Includes 10 heavy-duty springs
  • Made in the U.S.A.
Exclusive replacement-type coil bracket made of solid steel for exceptional strength Features a chrome finish

$16.95

$23.95

Heavy-Duty Kicker Cover Kit for 48-65   4-Speed Panhead High Performance Starter Motors for 65 Panhead
Heavy-Duty Kicker Cover Kit for 48-65 4-Speed PanheadHigh Performance Starter Motors for 65 Panhead
Includes chrome kick cover, clutch release shaft, clutch release finger and mounting hardware Installs with included socket-head bolts that replace the existing studs Replacement components available separately

100% new - not remanufactured! Starters feature oversize clutch rollers, cold headed steel idler gears and armature hairpins that are resistance-fused to the armature 1.4kW is a new replacement unit for stock and slightly modified engines;...

$96.95

$246.95

High Torque Starters for 65 Panhead High-Lift Valve Spring Kit for 48-65 Panhead
High Torque Starters for 65 PanheadHigh-Lift Valve Spring Kit for 48-65 Panhead

Starters feature 15% more power and torque than OEM units Manufactured using heavy-duty armature commutators, large drive-end bearings and needle bearings in the com-end caps

To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure

$159.95

$106.95

Hinged Rear Fender for 58-65 Panhead, swingarm Kick Start Bushing Kit  w/O- Ring for 48-65 Panhead
Hinged Rear Fender for 58-65 Panhead, swingarmKick Start Bushing Kit w/O- Ring for 48-65 Panhead

High quality with a raw steel smooth finish and no taillight hole

Made in the U.S.A.

$149.95

$23.95

Kickstand Bumpers Kickstarter Rebuild Kit for 48-65 Panhead
Kickstand BumpersKickstarter Rebuild Kit for 48-65 Panhead
  • Easy attachment with double-backed adhesive (included)
  • Sold Each
Everything required for a complete rebuild Kit includes shaft, gears, bushings, seals, O-rings, gaskets and other internal components

$1.95

$99.95

Large Eagle Head Front Fender Ornaments w/lights (amber eyes) Leather Lever Covers
Large Eagle Head Front Fender Ornaments w/lights (amber eyes)Leather Lever Covers

Large is approximately 21/2" tall Available as all-chrome or chrome with gold beak Fit most front fenders; include gasket and mounting hardware Sold individually NOTE: Requires drilling fender to mount.

Handcrafted, black leather clutch and brake lever covers come with laces Fit the larger size, stock or custom cruiser-style levers Set includes cover, laces, beads and instructions Match our leather grip covers perfectly Fit standard levers only, not wide-blade levers Made in the U.S.A.

$59.95

$12.95

Leather Lever Fringe Left Side Crankcase Bushing for 48-54 Panhead
Leather Lever FringeLeft Side Crankcase Bushing for 48-54 Panhead

Leather, lace-up lever covers for style and comfort Measure 12" L Sold in pairs

Standard Repl. OEM #24621-40

$17.95

$75.95

Lifter Base Screw Kits (1-1/4"- 24) Louvered Coil Cover for 65 Panhead
Lifter Base Screw Kits (1-1/4"- 24)Louvered Coil Cover for 65 Panhead
  • Includes eight chrome socket-head screws
  • Made in the U.S.A.

Chrome-plated and accented with five louvers for a truly custom appearance

$13.95

$16.95

Mainshaft Sprocket Nut for 48-65 Panhead Mechanical Rear Stoplight Switch
Mainshaft Sprocket Nut for 48-65 PanheadMechanical Rear Stoplight Switch
  • Replacement nut attaches mainshaft sprocket to main drive gear
  • Sold each

Waterproof mechanical stoplight switch attaches to rear brake rod or brake linkage and frame tube Ideal for custom applications

$7.95

$10.95

Mousetrap Eliminator for 48-65 Panhead Muffler Support for 58-65 FL and FLH
Mousetrap Eliminator for 48-65 PanheadMuffler Support for 58-65 FL and FLH

Chromed steel bracket allows use of 68-84 style Big Twin clutch cables on Knucklehead/Flathead models

  • Heavy-duty, heli-arc constructed supports
  • Chrome right side support is direct replacement for stock bracket

$14.95

$37.95

Neck Post Bearing Cups for 60-65 Panhead Oil Pressure Switch for 48-65 FL, FLH
Neck Post Bearing Cups for 60-65 PanheadOil Pressure Switch for 48-65 FL, FLH
  • Chrome Timken-type bearing cups
  • Cups sold in pairs
Precision-calibrated replacement oil pressure switch features heavy contacts, brass pressure ferrule, thermo-plastic insulator and brightly finished steel shell Designed and tested to ensure consistently accurate pressure thresholds Made in the U.S.A.

$29.95

$11.95

Oil Pump Drive Gear for 54-65 Panhead Oil Pump Drive Shaft Bushing for 48-65 Panhead
Oil Pump Drive Gear for 54-65 PanheadOil Pump Drive Shaft Bushing for 48-65 Panhead
  • Sold each
  • Made in the U.S.A.
  • Sold each
  • Made in the U.S.A.

$39.95

$27.95

Oil Tank for 65 Panhead Oil Tank-To-Fender Bracket for 48-57 Panhead
Oil Tank for 65 PanheadOil Tank-To-Fender Bracket for 48-57 Panhead

Replacement chrome oil tank comes with drain/fill plugs, cap assembly and gasket Approximately 3 quart capacity

Chrome bracket mounts horseshoe-type oil tanks to rear fenders on hardtail and custom frames Sold individually

$167.95

$6.95

Oil Tanks for 58-64 Panhead Oval Mirrors
Oil Tanks for 58-64 PanheadOval Mirrors

Replacement OEM-style oil tank for swingarm frames Available with chrome or raw finish Include dipstick and drain plug Accept OEM mounting hardware and oil lines Approximately 3 quart capacity

Designed by master bike builder Don Hotop Machined from billet aluminum Mirror head measures 5" x 2" with a 51/4" stem Fits right or left side Sold each Made in the U.S.A.

$164.95

$69.95

Passenger Floorboards for 58-65 FL Pillion Pads to match Wide Solo Seats for 58-65 FL, FLH
Passenger Floorboards for 58-65 FLPillion Pads to match Wide Solo Seats for 58-65 FL, FLH

Fit on lower frame tube and mount at the frame Come complete with rubber pads; mounting hardware not included Sold in pairs NOTE: May require some spacing on custom exhaust applications. NOTE: Not for kickstart models.

Pillion Pads- 10-3/4" L overall x 5-1/2" W x 2-1/2" H Feature automotive-grade vinyl in seating areas and on sides Molded polyurethane foam 3/16" ABS thermoformed seat base for a perfect fit Rubber bumpers and fully carpeted bottom to protect...

$74.95

$99.95

Pinion Gear Spacer for 54-65 Panhead Pinion Shaft Bushings for Panhead
Pinion Gear Spacer for 54-65 PanheadPinion Shaft Bushings for Panhead
  • Replacement for OEM #24703-54B
  • Made in the U.S.A.; sold each
  • Quality pinion shaft bushing; sold individually
  • Made in the U.S.A.

$7.95

$28.95

Pinion Shaft Gear Spacer for 54-65 Panhead Pivot Pin/Clip Kit for 65 Panhead
Pinion Shaft Gear Spacer for 54-65 PanheadPivot Pin/Clip Kit for 65 Panhead
  • Sold individually
  • Made in the U.S.A.
Replacement pin kit
Sold as a set

$18.95

$1.95

Points and Condensers for 48-65 Panhead Points Style Distributor for 48-64 Panhead w/dual hold down
Points and Condensers for 48-65 PanheadPoints Style Distributor for 48-64 Panhead w/dual hold down
Contact set features a metal spring designed to resist metal fatigue and a follower of space-age material to ensure longer life Condenser is sealed to help prevent breakdown due to moisture Meets or exceeds OEM specs Sold in kits or as individual components

Feature points, condenser and mechanical advance assemblies pre-installed Chrome finish Sold each

$12.95

$209.95

Points Style Distributor for 65 Panhead w/single hold down Predator 2-Up Seat
Points Style Distributor for 65 Panhead w/single hold downPredator 2-Up Seat

Feature points, condenser and mechanical advance assemblies pre-installed Chrome finish Sold each

For 58-65 FL, FLH 29" L Overall x 10-1/2" W Front x 7-1/2" W Rear x 1-3/4" H New low-profile design for maximum comfort Features automotive-grade vinyl in seating area and on sides Molded polyurethane foam for maximum comfort and styling 3/16"...

$209.95

$249.95

Predator Seat Pressure Plate for 48-65 Panhead
Predator SeatPressure Plate for 48-65 Panhead

For 58-65 FL, FLH 29" L Overall x 10-1/2" W Front x 5-1/2" W Rear x 1-3/4" H Low-profile design for maximum comfort Feature automotive-grade vinyl in seating areas and on sides Custom-molded polyurethane foam for maximum comfort and styling 3/16"...

Stamped steel construction Designed for use with five-stud clutch hubs Sold each

$239.95

$7.95

Primary Chain Adjusting Shoe for 65 Panhead Primary Chain for 48-65 Panhead; size #428-2-82
Primary Chain Adjusting Shoe for 65 PanheadPrimary Chain for 48-65 Panhead; size #428-2-82

Replaces stock nylon shoe

Improved fatigue resistance Pre-loaded to reduce initial elongation Endless construction using high-quality raw materials for long life

$6.95

$76.95

Pull Stoplight Switch for 48-57 FL Rear Axle Sleeve Nut for 48-57 Panhead
Pull Stoplight Switch for 48-57 FLRear Axle Sleeve Nut for 48-57 Panhead
  • Chrome replacement stoplight switch
  • Also works great for custom applications
Zinc plated 1"-20 x 3/8" x 13/8" Sold each Made in the U.S.A.

$15.95

$8.95

Rear Chain Adjuster Bolts for 48-65 Panhead (3/8"- 24 x 3") Rear Stand Mounting Hardware for 48-57 Panhead
Rear Chain Adjuster Bolts for 48-65 Panhead (3/8"- 24 x 3")Rear Stand Mounting Hardware for 48-57 Panhead
  • Chrome rear chain adjuster bolts
  • Sold in pairs
  • Accurate reproduction of original fasteners used to mount the rear stand
  • Made in the U.S.A.

$11.95

$16.95

Rear Wheel Brake Cylinder for 58-62 Panhead Rear Wheel Brake Cylinder for 63-65 Panhead
Rear Wheel Brake Cylinder for 58-62 PanheadRear Wheel Brake Cylinder for 63-65 Panhead
  • High-quality OEM replacement component
  • Sold each
  • High-quality OEM replacement component
  • Sold each

$39.95

$46.95

Rear Wheel Sprocket for 48-57 Panhead Rear Wheel Sprocket for 60-65 Panhead
Rear Wheel Sprocket for 48-57 PanheadRear Wheel Sprocket for 60-65 Panhead
  • Zinc-plated 51-tooth rear sprocket
  • Includes necessary rivets
  • Zinc-plated 51-tooth rear sprocket
  • Includes necessary rivets

$41.95

$39.95

Rear Wheel Sprocket for L58-59 Panhead Replacement Front Fender for 54-65 FL
Rear Wheel Sprocket for L58-59 PanheadReplacement Front Fender for 54-65 FL
  • Zinc-plated 51-tooth rear sprocket
  • Includes necessary rivets

Repl. OEM #s 59000-58, 59000-81, 59100-82, 59101-79A Designed specifically as an OEM replacement NOTE: Also fits FLT and FLHT models when additional trim holes are drilled.

$39.95

$106.95

Replacement Rubber for Moon Floorboards Replacement Smooth Custom Rear Fender Struts for 58-65 FL
Replacement Rubber for Moon FloorboardsReplacement Smooth Custom Rear Fender Struts for 58-65 FL

Sold in pairs

  • Beautifully chromed finish rear fender struts
  • sold in pairs

$10.95

$79.95

Replacement Stock-Style Fender Struts for 58-65 FL Replacement Tail Light Lens and Gasket for 52-65 lens
Replacement Stock-Style Fender Struts for 58-65 FLReplacement Tail Light Lens and Gasket for 52-65 lens
Beautifully chromed finish rear fender struts For 58-65 FL; repl. OEM #s 59932-58, 59932-77, w/o saddlebag mounting holes sold in pairsTop-quality replacement lenses and gaskets Lenses are available in red Sold each

$79.95

$4.95

Right Roller Bearing Retainer for 58-65 Panhead Rocker Covers for 48-65 Panhead
Right Roller Bearing Retainer for 58-65 PanheadRocker Covers for 48-65 Panhead
  • High-quality, replacement right crankcase roller bearing retainer
  • Sold each

Made from sheets of solid brass, not brass-plated Drawn and formed and polished to a bright finish; available in a smooth or ribbed design Sold in pairs Made in the U.S.A.

$22.95

$344.95

Rubber Solenoid Boot for 65 Panhead Seat Bar Bushing Set for 48-64 Panhead
Rubber Solenoid Boot for 65 PanheadSeat Bar Bushing Set for 48-64 Panhead
  • A molded black rubber boot for 4- and 5-speed starter solenoids
  • We recommend replacing the OEM boot when installing our chrome solenoid end cover
Precision machined, heat treated and ground bushings Cad-plated Includes all mounting hardware Made in the U.S.A.

$5.95

$32.95

Seat Clevis and Spring for all 48-65 Panhead Seat Post Bushing for 48-57 Panhead
Seat Clevis and Spring for all 48-65 PanheadSeat Post Bushing for 48-57 Panhead
Reproduction of seat pin and spring retainer used with seat post on all 48-65 Panhead Parkerized finish Made in the U.S.A.
  • Reproduction of bronze bushing
  • Made in the U.S.A.

$12.95

$24.95

Seat Post Bushing Installation Tool for 48-57 Panhead Seat Post Rod Assembly for 48-65 Panhead
Seat Post Bushing Installation Tool for 48-57 PanheadSeat Post Rod Assembly for 48-65 Panhead
Heat-treated, black oxide finish tool Installs seat post bushing Made in the U.S.A.
  • Reproduction of OEM seat post rod, nuts and spacers used on all 36-47 Knucklehead
  • Made in the U.S.A.

$14.95

$80.95

Seat Post Rod Locknut for 48-65 Panhead Shifter Forks for 48-65 Panhead
Seat Post Rod Locknut for 48-65 PanheadShifter Forks for 48-65 Panhead
Seat post rod locknut and lockwasher Cad-plated Made in the U.S.A.

Made in the U.S.A.

Sold Each

$5.95

$12.95

Shrouded Skull Fender Ornament Slider Bushings for 49-65 Panhead
Shrouded Skull Fender OrnamentSlider Bushings for 49-65 Panhead

Chrome with black shroud Includes a rubber gasket and mounting hardware Universal application, fits most front fenders Sold each NOTE: Requires drilling fender for installation.

High-quality replacement bushings Upper or Lower Bushings Sold in pairs

$29.95

$13.95

Slot Dash and Base Plate for 73-84 FX Small Chrome Eagle Head Front Fender Ornaments
Slot Dash and Base Plate for 73-84 FXSmall Chrome Eagle Head Front Fender Ornaments
Early look Big Twin slot dash Dash cover sold separately Dash plate assembly w/wiring terminals, switch screws, tank mount screws and light sockets (bulbs not included) NOTE: Speedometer and cables must be purchased separately. Any 2:1 speedometer may be used.Die-cast eagle fender ornaments in two different sizes Small measures approximately 11/2" tall Available with gold eyes (no lights) or red eyes that light up Fit most front fenders; include gasket and mounting hardware Sold individually NOTE: Requires drilling fender to mount.

$55.95

$23.95

Smooth Coil Cover for 65 Panhead Solenoid Body Cover for 65 Panhead
Smooth Coil Cover for 65 PanheadSolenoid Body Cover for 65 Panhead
  • Plain chrome style
  • Covers coil when mounted in stock location
  • Chrome solenoid body cover
  • Will not fit rubber-mounted motors

$21.95

$15.95

Solenoid End Cover for 65 Panhead Solid State Regulators for 65 FL Panhead
Solenoid End Cover for 65 PanheadSolid State Regulators for 65 FL Panhead

Beautifully chromed cover features die-cast construction Fits over the starter solenoid rubber boot U.S. Des. Pat. #283,210.

OEM #- All 12V Amperage- 10 High-reliability voltage regulators feature rugged aluminum alloy construction All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are...

$18.95

$116.95

Spotlight Mounting Bracket for 49-65 FL Standard Clutch/Brake Levers for 65 FL
Spotlight Mounting Bracket for 49-65 FLStandard Clutch/Brake Levers for 65 FL

"Revival" bracket mounts most 41/2" spotlights

Fit 65 Panhead clutch controls and brake controls

$46.95

$7.95

Star Hub Inner Bearing Hub Race for 48-65 Panhead Starter Drive for 65 Panhead
Star Hub Inner Bearing Hub Race for 48-65 PanheadStarter Drive for 65 Panhead
  • Sold each
  • Made in the U.S.A.

Heavy-duty, five-roller clutch Weatherproof Sold each Made in the U.S.A.

$44.95

$36.95

Starter End Cover for 65 Panhead Starter Gear Engagement Lever for 65 Panhead
Starter End Cover for 65 PanheadStarter Gear Engagement Lever for 65 Panhead
Chrome, die-cast starter end cover adds a finishing touch to custom or fully-dressed Panhead models Smooth finish

Replaces OEM-style engagement lever

$13.95

$8.95

Starter Solenoid for 65 Panhead Starter/Horn Switch for 48-65 FL
Starter Solenoid for 65 PanheadStarter/Horn Switch for 48-65 FL

Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc Made in the U.S.A.

  • Chromed replacement handlebar starter or horn switch
  • Sold individually

$43.95

$10.95

Steering Stem Bearing Adjusting Nuts for 49-65 Panhead Stem Nut Lock Washers for 49-65 Panhead
Steering Stem Bearing Adjusting Nuts for 49-65 PanheadStem Nut Lock Washers for 49-65 Panhead
Adjusting nuts are available in a chrome finish with dust cover or zinc finish without a dust coverStem nut lock washers for triple trees Sold in 10-pk. Made in the U.S.A.

$10.95

$17.95

Swingarm Pivot Bolt Lock Tabs for 58-65 Panhead Tail Light for 65 Panhead; 57-72 XL
Swingarm Pivot Bolt Lock Tabs for 58-65 PanheadTail Light for 65 Panhead; 57-72 XL
  • Sold Each
  • Made in the U.S.A.
  • Chrome housing with red lens
  • 12V Bulb

$1.55

$32.95

Tappet Adjuster Locknuts for 48-65 Panhead Tappet Roller Kit for 48-65 Panhead
Tappet Adjuster Locknuts for 48-65 PanheadTappet Roller Kit for 48-65 Panhead
Split locknuts with 9/32"-32 thread Sold in four-pack Made in the U.S.A.Made from 52100 bearing material Includes 4340 chromoly axle Sold each Made in the U.S.A.

$8.95

$30.95

The "Great" Generator for 65 Panhead- OEM# 29975-65A Three-Light Dash Cover and Base Plate
The "Great" Generator for 65 Panhead- OEM# 29975-65AThree-Light Dash Cover and Base Plate

Replacement 10A, 12V generator Features a balanced armature, precision-ground, heat-treated armature shaft, die-cast and machined-aluminum end cover and end plate Brush end contains sealed roller bearing, while the drive end has a shielded ball...

Chrome reproduction of the three-light dash found on 63-65 FL models Cover is made of chrome-plated steel and the base is zinc plated ( cover and base sold separately ) Both mount to OEM tanks or Drag Specialties tanks

$239.95

$59.95

Toggle Switch Top Motor Mount Studs for 48-65 FL
Toggle SwitchTop Motor Mount Studs for 48-65 FL

Waterproof two-position switch Use with any custom application Made in the U.S.A.

  • Sold in a 4-pack
  • Made in the U.S.A.

$20.95

$15.95

Transmission Alignment Mount for 48-65 Panhead Transmission Drive Speedometer Cable
Transmission Alignment Mount for 48-65 PanheadTransmission Drive Speedometer Cable
Provides an inexpensive way to align and keep the transmission in place when running a belt drive Made of 1" x 1" billet aluminum Made in U.S.A.

For mini speedo and 12mm speedo heads Length: 49" Top nut size: 12mm Replacement speedometer cables comes in black vinyl covering Available for transmission-drive Harley models The entire line of Drag Specialties cables are made to match...

$78.95

$19.95

Transmission Drive Speedometer Cable for 48-61 FL Transmission Drive Speedometer Cables for 62-65 FL, FLH
Transmission Drive Speedometer Cable for 48-61 FLTransmission Drive Speedometer Cables for 62-65 FL, FLH

OEM #67026-36 Length: 31" Top nut size: 3/4"-36 Replacement speedometer cables comes in black vinyl covering Available for transmission-drive Harley models The entire line of Drag Specialties cables are made to match perfectly NOTE: Lengths and...

OEM #67026-62 Length: 35" Top nut size: 5/8"-18 Replacement speedometer cables come in your choice of stainless steel with non-abrasive clear coat or black vinyl covering Available for transmission-drive Harley models The entire line of Drag...

$19.95

$19.95

Transmission Mainshaft Sprockets for 48-65 Panhead Transmission Mount Hardware for 49-64 Panhead
Transmission Mainshaft Sprockets for 48-65 PanheadTransmission Mount Hardware for 49-64 Panhead
  • Replaces OEM early-style sprockets with recess for transmission case
  • Sold each
Available in parkerized or cadmium plated finish Includes two bolts, OEM #4362; two bolts, OEM #4340; two bolts, OEM #3975; two nuts, OEM #7879; two nuts, OEM #7752; four nuts, OEM #7796; two cotter pins, OEM #528; seven lock washers, OEM #7040;...

$22.95

$46.95

Transmission Mounting Hardware Kit for 65 Panhead Transmission Mounting Plate
Transmission Mounting Hardware Kit for 65 PanheadTransmission Mounting Plate
Chrome-plated Includes one lock strap, OEM #34747-65; five washers, OEM #6408; five lock washers, OEM #7038; two bolts, OEM #4362; two bolts, OEM #4336; four bolts, OEM #7793 and one bolt, OEM #4323 Made in the U.S.A.

For 48-65 Paughco rigid Panhead and swingarm 4-speed frames Heavy-duty construction Easy bolt-in application Steel construction; chrome finish Made in the U.S.A.

$36.95

$81.95

Transmission Top Cover Screw Kit for 48-55 Panhead Transmission Top Cover Screw Kit for 56-64 Panhead
Transmission Top Cover Screw Kit for 48-55 PanheadTransmission Top Cover Screw Kit for 56-64 Panhead
Kit includes two 1/4"-24 long screws; OEM #2349, ten 1/4"-24 short screws; OEM #2333, one breather screw; OEM #34720-36 and one vent screw; OEM #34720-36 Made in the U.S.A.Kit includes two 1/4"-24 long screws, OEM #2349; eleven 1/4"-24 short screws, OEM #2333; one breather screw, OEM #34720-56 Chrome finish Made in the U.S.A.

$13.95

$19.95

Transmission Top Cover Screw Kit for 65 Panhead Turn Signal Mounting Bracket Kit for 63-65 FL and FLH
Transmission Top Cover Screw Kit for 65 PanheadTurn Signal Mounting Bracket Kit for 63-65 FL and FLH
Kit includes two 1/4"-24 long screws, OEM #1765W; nine 1/4"-24 short screws, OEM #1766W; one breather screw, OEM #34720-56 Chrome-plated finish Made in the U.S.A.

Chrome OEM replacement turn signal mounting brackets All wires route easily through the bracket for a clean look when installed Universal-style clamp allows the kit to be used for a wide range of applications

$24.95

$26.95

Universal Fender Skins  (15" L x 4-3/4" W) Voltage Regulator Mounting Kit for 65 Panhead
Universal Fender Skins (15" L x 4-3/4" W)Voltage Regulator Mounting Kit for 65 Panhead

Features automotive-grade vinyl, embossed gator leather center or flame stitch automotive-grade vinyl center with leather perimeters and a finished edge Felt liner to protect paint Includes black zinc washer and screw to complete installation...

  • Kit includes three rubber insulators with nuts and lock washers
  • Made in the U.S.A.

$36.95

$7.95

Wheel Bearing Seals for Star Hub With Timken-Style Bearings Wheel Gasket Kit for 48-65 Panhead
Wheel Bearing Seals for Star Hub With Timken-Style BearingsWheel Gasket Kit for 48-65 Panhead

Complete set of replacement seals

Each wheel kit contains a small wheel hub cork washer, large wheel hub cork washer and wheel hub star gasket Seal also sold separately

$4.95

$11.95

Wide Solo Seats w/o removable fringe for 58-65 FL, FLH Wire Fuel Line Guide
Wide Solo Seats w/o removable fringe for 58-65 FL, FLHWire Fuel Line Guide

Seats 21-1/2" L overall x 12" W x 2" H Feature automotive-grade vinyl in seating areas and on sides Molded polyurethane foam 3/16" ABS thermoformed seat base for a perfect fit Rubber bumpers and fully carpeted bottom to protect paint Pillion pad...

Chrome guide is used between cylinders and on back of manifold Can also be used for routing cables or wires Sold each

$209.95

$1.95

Wrist Pin Bushings for 48-65 Panhead
Wrist Pin Bushings for 48-65 Panhead
Std. .8955" or +.005" Machined from solid bronze bar stock Hold concentricity to less than .0002" Lead-in edge for easy installation Sold in pairs Made in the U.S.A.

$32.95

1 - 223 of 223 items