Road 6 Customs Holey Roller handlebars for 2015-2020 Road Glides!

Admit it... the stock bars SUCK! 

Harley changed the mounting and clamping areas on the new 2015-2020 FLTR's and we came to the rescue! Specifically designed for your 2015-2020 Road Glide, these new 1 1/4" diameter bars are available in rises of 9", 11", 13" and 15" with 6 1/2" of pullback for the perfect wrist angle.

Specifically designed to fit the 2015 & newer Road Glide risers and hand controls. 

If you have a CVO please contact us before ordering

NOTE:

The gap above the gusset must be there as your stock clutch and brake clamps wrap around this section of the bars and "tuck" through this gap. See installed pics.

The 9", 11" and 13" bars can be installed in under TWO HOURS and required NO ADDITIONAL PARTS! Yes that is correct, the stock brake line, clutch line, and all the wires including the throttle-by-wire is long enough for 13" tall bars. Your stock wiring, clutch and brake lines are long enough. In fact, you do not even have to crack the hydraulic lines so no bleeding of your clutch or brake is necessary! Fast, simple and a breeze to internally wire! Your stock cables & wires will not reach with the 15's or taller bars.

We can get you what you need for taller bars as well! 

Made from .120" seamless tubing, tig welded, machine knurled, lasered speed hole gussets specifically shaped to work with your stock controls, black powder coated, includes billet aluminum end caps and instructions.

Tip to Tip approximate measurements:

9" - 31"

11" - 31 1/2"

13" - 32"

15" - 32 1/2"

**You might also need heated grip wire extensions if your bike has heated grips, that we also sell seperately** 

NEW!! We also have a video now to help you install your new Road Glide bars. You can either copy and paste this link or click on the picture on the main page. Thank you!

https://www.youtube.com/watch?v=fr90KPZ7gHQ