CHOPPER PARTS

 
 
1 - 57 of 57 items
"Do It Yourself" Rabbit Ear Handlebar Kit 10" Ape Hangers(narrow bottom) NAKED HANDLEBARS
"Do It Yourself" Rabbit Ear Handlebar Kit10" Ape Hangers(narrow bottom) NAKED HANDLEBARS
Can't find bars with the right rise? Pullback? Tip-to-tip? For those of you that just cant quite find the old school rabbit ears that fit your desired dimensions, we bring you the "Do It Yourself" Rabbit Ear Handlebar kit! This kit includes...

Road 6 Customs MADE IN THE USA 10" APE HANGERS Now with Removable End Caps for Easier Internal wiring! 1" fits ALL HARLEY controls and late model metrics with 1" diameter handle bars. If you have an older metric, Honda, Yamaha, Suzuki, Kawasaki...

$74.99

$210.99

$180.99

12" Ape Hangers(narrow bottom) NAKED BARS 1991-2003 Harley Sportster 530 Chain Conversion
12" Ape Hangers(narrow bottom) NAKED BARS1991-2003 Harley Sportster 530 Chain Conversion

12" APE HANGERS Now with Removable End Caps for Easier Internal wiring! 1" fits ALL HARLEY controls and late model metrics with 1" diameter handle bars. If you have an older metric, Honda, Yamaha, Suzuki, Kawasaki or Triumph or BSA, we also offer...

NEW! 530 Chain Conversion for 5 speed Sportsters through 2003! We have been asked for a 530 chain conversion so here it is! We use a PBI front sprocket with the proper offset to clear up to a 150 tire on a stock width wheel and the correct rear...

$210.99

$180.99

$275.00

$254.95

1991-2003 Harley Sportster 530 Chain Conversion- Black Sprocket 2000I PC Programmable Electronic Ignition Kits Module Only
1991-2003 Harley Sportster 530 Chain Conversion- Black Sprocket2000I PC Programmable Electronic Ignition Kits Module Only

NEW! 530 Chain Conversion for 5 speed Sportsters through 2003! We have been asked for a 530 chain conversion so here it is! We use a PBI front sprocket with the proper offset to clear up to a 150 tire on a stock width wheel and the correct rear...

Completely self-contained so entire unit hides under the cam cover for a clean look on custom bikes Single-fire operation down to zero rpm for easier cranking and kicking Will operate in all combinations of single-fire or dual-fire with...

$275.00

$254.95

$219.99

Antique/Vintage Style Black Springer FREE SHIPPING Antique/Vintage Style Chrome Springer FREE SHIPPING
Antique/Vintage Style Black Springer FREE SHIPPINGAntique/Vintage Style Chrome Springer FREE SHIPPING

Check out how cool this is! Antique style springers! Includes 3/4" Axle, so it works with modern wheels! Fits Sportsters or big twins with 1" neck bearings. Available in lengths from 20",22", 24" and 26" Available in chrome or black! Measured...

Check out how cool this is! Antique style springers! Includes 3/4" Axle, so it works with modern wheels! Fits Sportsters or big twins with 1" neck bearings. Available in lengths from 20",22", 24" and 26" Available in chrome or black! Measured...

$899.99

$949.99

Harley Shovelhead Weld On Hardtail Seat for Rigid Sportster Chopper
Harley Shovelhead Weld On HardtailSeat for Rigid Sportster Chopper

Ask and you shall receive! We have been asked for nearly a decade to build hardtails for Shovels, and now that these bikes are coming down in price we are getting the request more and more so here they are! We use OEM diameter DOM tubing top and...

10" wide for driver area & 6.75" wide for passenger area. Driver Seating: 10" wide Passenger Seating: 6.75" wide

$279.99

$392.00

82-03 XL Sportster Weld On Hardtail 130/150 TIRE COMPLETE KIT 82-03 XL Sportster Weld On Hardtail up to 200 tire COMPLETE KIT
82-03 XL Sportster Weld On Hardtail 130/150 TIRE COMPLETE KIT82-03 XL Sportster Weld On Hardtail up to 200 tire COMPLETE KIT

82-03 Harley Sportster Hardtail (Includes: Hardtail, Oil Tank, Battery Box, and Axle) Complete Kit AXLE ADJUSTER KIT NOW INCLUDED!! Frame stretch 2 1/2" Approximately 4" of ground clearance depending on what tire you use. We have put together a...

82-03 Harley Sportster Hardtail (Includes: Hardtail, Oil Tank, Battery Box, and Axle) Complete Kit AXLE ADJUSTER KIT NOW INCLUDED!! Frame stretch 2 1/2" Approximately 4" of ground clearance depending on what tire you use. We have put together a...

$659.99

$659.99

4 Under Black & Copper Springer NOT DNA BRAND! FREE SHIPPING! NOT DNA BRAND! 4 under Black & Chrome IN STOCK NOW! FREE SHIP!
4 Under Black & Copper Springer NOT DNA BRAND! FREE SHIPPING!NOT DNA BRAND! 4 under Black & Chrome IN STOCK NOW! FREE SHIP!

Black and Copper -4 Springer front end. These fit with our Sportster Hardtail Kits really nice, setting the frame down low without having to rake the neck. Also fits big twins. Does not fit 2004+ XL models. Features a one piece, forged rear leg...

These are back in stock but quantities are limited! These Springers feature SAFE one piece forged rear legs unlike the "Other" cheap brands you see online that are butt welded under the lower tree and have been breaking and causing injuries. Do...

$550.00

$500.00

NOT DNA BRAND! 4 under Chrome Springer- Free Shipping! Skinny Hardtail and Axle Kit Combo SAVE $ with this package deal
NOT DNA BRAND! 4 under Chrome Springer- Free Shipping!Skinny Hardtail and Axle Kit Combo SAVE $ with this package deal
Chrome -4 Springer front end. These fit with our Sportster Hardtail Kits really nice, setting the frame down low without having to rake the neck. Also fits big twins. Does not fit 2004+ XL models. Features a one piece, forged rear leg that passes...

Looking to hardtail your 1982-2003 Sportster? Well look no further! We have been selling this basic frame design for years, installed hundreds, sold thousands and using them we have built many complete bikes for customers and ourselves. All the...

$500.00

$329.95

Axle Kit for 82-03 HD Sportster 130/150 tire NARROW Hardtail Kit Axle for 82-03 Road 6 Customs 200 hardtail frames
Axle Kit for 82-03 HD Sportster 130/150 tire NARROW Hardtail KitAxle for 82-03 Road 6 Customs 200 hardtail frames

This is the axle kit required for our NARROW Hardtail kits. We machine this in house out of bearing ground stainless steel so they fit your bearings perfect and wont rust! The kit includes the axle, hardware AND the appropriate spacers require to...

Stainless steel axle works with our wide Sportster hardtail frames, up to 200 tire.

$59.99

$59.99

Low Rider Solo Seat for Custom Applications Oil Line & Fitting Kit
Low Rider Solo Seat for Custom ApplicationsOil Line & Fitting Kit
Black solo seats are designed for custom hardtail frames Vinyl construction with Scorpion stitch Aluminum base with carpet Pillion pad available separately; part #r6cds907057 Made in the U.S.A.

This is for our Sportster Hardtail Kits when using our oil tanks. Can also be used with our oil tanks in any custom application. Includes all the fittings, a plug, high quality hose and clamps. 

$225.95

$34.99

Road 6 Customs Frisco'd T's handlebars Rear Belt for Hardtails 135T 1 1/8"
Road 6 Customs Frisco'd T's handlebarsRear Belt for Hardtails 135T 1 1/8"

NOW AVAILABLE IN GLOSS BLACK POWDERCOAT! Switches are for Bitches! Our new "Frisco T's" are the answer for anyone building a skinny Frisco style chopper with their narrow 20 3/4" tip to tip width (this can be trimmed down to make them even...

· Improved RPP™ Panther® Design · Feature ULTRA-CORD™ tensile members and the Able™ compound · ULTRA-CORD doesn't stretch or shrink, thus reducing the strain on bearings, shafts, and...

$79.99

$178.95

Offset sprocket 200 hardtail & locking transmission output nut Antique Brown Seat by Redtail Leather
Offset sprocket 200 hardtail & locking transmission output nutAntique Brown Seat by Redtail Leather

 

"Don't Be Slippin' When You're Out Trippin'" These are without question the NICEST seats we have ever seen. These seats are 100% HAND MADE in the USA for our hardtail frames by Redtail Leather. These seats are built to last your lifetime. WITH...

$225.00

$240.00

Black Solo Seat by Redtail Leather Biltwell, Inc. Chromoly Seat Hinge / Pivot - Black
Black Solo Seat by Redtail LeatherBiltwell, Inc. Chromoly Seat Hinge / Pivot - Black

"Don't Be Slippin' When You're Out Trippin'" These are without question the NICEST seats we have ever seen. These seats are 100% HAND MADE in the USA for our hardtail frames by Redtail Leather. These seats are built to last your lifetime. WITH...

The Biltwell seat bracket is engineered to fit the mounting studs on most solo seats. It features two long slots for adjustability. Its rugged black electroplated finish looks great as is, or you can abrade the surface with a sandblaster or steel...

$240.00

$49.95

Stainless Steel Seat Hinge / Pivot - Polished 2" seat springs
Stainless Steel Seat Hinge / Pivot - Polished2" seat springs
It's fully polished after casting and also available in a black electroplated finish. The weld-on bung is larger for increased durability and more weld surface area. If you've already welded the bungs unit onto your bike, this bracket will bolt right up.

Custom springs are completely chromed and bolt to the bottom of most solo seats Excellent when used on rigid frame motorcycles to absorb road shock, or on most other solo seats Sold in pairs

$79.95

$21.95

3" Seat Springs 5" Seat Springs
3" Seat Springs5" Seat Springs

Custom springs are completely chromed and bolt to the bottom of most solo seats Excellent when used on rigid frame motorcycles to absorb road shock, or on most other solo seats Sold each

Custom springs are completely chromed and bolt to the bottom of most solo seats Excellent when used on rigid frame motorcycles to absorb road shock, or on most other solo seats Sold in pairs

$8.95

$17.95

Solo seat spring bungs, stanion, weld on, seat mounts "Big Flip" Seat Pan by Road 6 Customs
Solo seat spring bungs, stanion, weld on, seat mounts"Big Flip" Seat Pan by Road 6 Customs

Weld on solo seat spring mount. Machined from 1 piece of cold rolled steel, perfect for welding. Fits either 1" or 1 1/4" tubing with no modifications. We supply everything shown. Both mounts, washers and lock pins. Made in the U S A ! When...

Don't fall off the back and tear up your crack! Tired of sliding off the back of your seat? Having a hard time finding a pan that fits your frame? Look no further! We were having the same issues, so now we are making our own "Big Flip" seat pans....

$29.99

$49.99

Slimline Seat - Black Smooth Slimline Seat - Black Tuck n ' Roll
Slimline Seat - Black SmoothSlimline Seat - Black Tuck n ' Roll

Fitment: This is a custom motorcycle component that requires basic fabrication skills and mechanical acumen to install properly. If your motorcycle already has a seat hinge and spring bungs installed on the frame, you’re halfway there,...

Fitment: This is a custom motorcycle component that requires basic fabrication skills and mechanical acumen to install properly. If your motorcycle already has a seat hinge and spring bungs installed on the frame, you’re halfway there,...

$114.99

$114.99

Solo Seats King and Queen Seat for Custom/Ridgid
Solo SeatsKing and Queen Seat for Custom/Ridgid

Heavy-gauge stamped steel pan with gently sloping rear kick for added support Stamped-in ridges on the pan increase stiffness and give the pan a clean, classic look with a matte black electroplated finish Covers are hand-stitched heavy-duty black...

Features automotive grade vinyl cover High density foam foundation 1/8" aluminum pan Requires use of a sissy bar Made in the U.S.A. NOTE: All Drag Specialties seats and sissy bars are designed to function together, unless otherwise noted. SAFETY...

$119.95

$379.95

Scorpion Solo Seat for Custom/Ridgid 10" Ape Hangers(narrow bottom) HOLEY ROLLER HANDLEBARS
Scorpion Solo Seat for Custom/Ridgid10" Ape Hangers(narrow bottom) HOLEY ROLLER HANDLEBARS

Front and Rear Seats SOLD SEPARATELY Features automotive grade vinyl cover 1/8" aluminum pan Front and rear matching seats Foam-injected interior for comfort Carpeted base protects paint Made in the U.S.A.

Road 6 Customs MADE IN THE USA 10" APE HANGERS Now with Removable End Caps for Easier Internal wiring! 1" fits ALL HARLEY controls and late model metrics with 1" diameter handle bars. If you have an older metric, Honda, Yamaha, Suzuki, Kawasaki...

$134.95

$214.99

$184.99

12" Ape Hangers(narrow bottom) HOLEY ROLLER BARS Horizontal Model A License Plate Bracket & Light
12" Ape Hangers(narrow bottom) HOLEY ROLLER BARSHorizontal Model A License Plate Bracket & Light

12" APE HANGERS Now with Removable End Caps for Easier Internal wiring! 1" fits ALL HARLEY controls and late model metrics with 1" diameter handle bars. If you have an older metric, Honda, Yamaha, Suzuki, Kawasaki or Triumph or BSA, we also offer...

Horizontal License Plate Bracket with Model A Tail Light LIGHT INCLUDED IN KIT!!!! INSTALLS IN 10 MINUTES OR LESS! We have finally added a HORIZONTAL version of our popular Model A tail light/license plate bracket to our product line. As with all...

$214.99

$184.99

$59.99

Vertical Side Mount License Plate Bracket & BULLET LIGHT Cat Eye Side Mount Vertical License Plate Bracket & light
Vertical Side Mount License Plate Bracket & BULLET LIGHTCat Eye Side Mount Vertical License Plate Bracket & light

Vertical License Plate Bracket with Bullet Tail Light LIGHT INCLUDED IN KIT!!!! INSTALLS IN 10 MINUTES OR LESS! As with all of our parts, these are High Quality, STEEL parts made in our own shop right here in the USA! The Bracket is powder coated...

Side Mount License Plate Bracket with Cat Eye Light We have put together a kit for you that includes our Bracket and a Cat Eye Light. The Light has a clear window in the bottom of it to illuminate your license plate CNC Cut Powder Coated Black...

$59.99

$59.99

Model A Side Mount Vertical License Plate Bracket & Light Horizontal Cat Eye Side Mount License Plate Bracket & LIGHT
Model A Side Mount Vertical License Plate Bracket & LightHorizontal Cat Eye Side Mount License Plate Bracket & LIGHT

Side Mount License Plate Bracket with Model A Light We have put together a kit for you that includes our Bracket and a High Quality, Stainless Steel Model A Light with Glass Lenses. These are the highest quality reproduction Model A lights...

Road 6 Customs Side Mount License Plate Bracket & Light Light is included! CNC Cut Powder Coated Black All of our products are made in house, and not farmed out to the lowest bidder. Every part is made start to finish right here in our shop....

$59.99

$59.99

CURVED VERTICAL Model A Side Mount License Plate Bracket & Light Curved Radius Side Mount License Plate Bracket Mount
CURVED VERTICAL Model A Side Mount License Plate Bracket & LightCurved Radius Side Mount License Plate Bracket Mount

CURVED VERTICAL Model A Side Mount License Plate Bracket with Model A Light We have put together a kit for you that includes our Bracket and a High Quality, Stainless Steel Model A Light with Glass Lenses. These are the highest quality...

Vertical Curved License Plate Bracket Strudy 10 gauge construction Powder coated for durability Three "RAT ROD" Lightening holes to reduce weight and add style! LIFETIME WARRANTY!!! This bracket will mount to either the left or right side HAVE A...

$64.99

$28.99

Horizontal Model A License Plate Bracket Side Mount License Plate HORIZONTAL bracket
Horizontal Model A License Plate BracketSide Mount License Plate HORIZONTAL bracket

Horizontal License Plate Bracket INSTALLS IN 10 MINUTES OR LESS! DOES NOT INCLUDE LIGHT!! We have finally added a HORIZONTAL version of our popular Model A tail light/license plate bracket to our product line. As with all of our parts, these are...

Road 6 Customs now proudly offers our popular license plate brackets in a horizontal option. Made from ONE piece of heavy gauge steel, this bracket has NO welds. None of our brackets are made from flimsy tin like others you may find. CNC LASER...

$28.99

$21.99

Vertical Model A side mount license plate bracket Side Mount License Plate Tail Light Mount
Vertical Model A side mount license plate bracketSide Mount License Plate Tail Light Mount

Vertical Model A Side Mount License Plate Bracket Our customers kept asking us if we had it..... SO WE MADE IT! CNC Cut from THICK 10 gauge steel, then beautifully powdercoated black! We add three large "lightening" holes to save weight and give...

M A D E I N U S A Road 6 Customs now proudly offers our popular Vertical Side Mount License Plate Bracket with a Tail Light Mount. Made from ONE piece of heavy gauge steel, this bracket has NO welds. None of our brackets are made from flimsy tin...

$28.99

$28.99

CURVED VERTICAL Model A side mount license plate bracket Vertical Side Mount License Plate bracket
CURVED VERTICAL Model A side mount license plate bracketVertical Side Mount License Plate bracket

CURVED VERTICAL Model A Side Mount License Plate Bracket ROAD 6 CUSTOMS Our customers kept asking us if we had it..... SO WE MADE IT! CNC Cut from THICK 10 gauge steel, then beautifully powdercoated black! We add three large "lightening" holes to...

VERTICAL SIDE MOUNT LICENSE PLATE BRACKET We took our popular side mount license plate bracket and made it even better! We added three lightening holes for that "Rat Rod" look, and to make the bracket much lighter! CNC LASER CUT and PRECISION DIE...

$33.99

$21.99

Vertical Side Mount Bullet License Plate Bracket Horizontal Mount Bullet License Plate Bracket
Vertical Side Mount Bullet License Plate BracketHorizontal Mount Bullet License Plate Bracket

Road 6 Customs Products Proudly Made in the USA! Vertical License Plate Bracket INSTALLS IN 10 MINUTES OR LESS! As with all of our parts, these are High Quality, STEEL parts made in our own shop right here in the USA! The Bracket is powder coated...

Road 6 Customs Products Proudly Made in the USA! Horizontal License Plate Bracket INSTALLS IN 10 MINUTES OR LESS! As with all of our parts, these are High Quality, STEEL parts made in our own shop right here in the USA! The Bracket is powder...

$28.99

$28.99

7 1/2" Flat Rear Fender Holey Roller Fender Struts
7 1/2" Flat Rear Fender Holey Roller Fender Struts

Flat Rear fender. Will fit our hardtails. Please contact us with any questions!

 

42" long

These are a Road 6 Customs original design.  They are available in either 11 or 11 1/2".  Contact us for more info.

$95.95

$74.99

(ALIEN) Axed Wasp-Style 2.2 gal Chopper Motorcycle Gas Tank
(ALIEN) Axed Wasp-Style 2.2 gal Chopper Motorcycle Gas Tank
Wasp-style narrow gas tanks for custom applications that have a great vintage look Made from precision steel stampings and hold 2.2 gal. Have a right side 3/8" NPT and left side 1/4" NPT petcock bung Universal brackets make it easy to mount it to...

$161.95

1 - 57 of 57 items