Footrests & License Plate Frames
|
|
| 2" Extended Forward Controls for 04-13 XL Models | Adjustable Passenger Pegs |
| Black anodized steel forward controls Replace OEM forward controls or convert from mid-controls Include rubber insert footpegs, shift peg and mounting hardware; use stock brake master cylinder NOTE: Not for use with 2-1 exhaust systems. | For 10-15 FLHT (except 10-13 FLHTCUSE, 14-15 FLHTKSE, 15 FLHTKL, 15 FLHTCUL), 11-13 FLTR (except 11 FLTRUSE), 10-15 FLHR (except 13-14 FLHRSE) and 10-15 Trikes Gives passenger multiple foot placement options Bolt to existing passenger floorboard... |
$564.99 | $199.95 |
|
|
| Brake Pedal | Chrome 3-1/2" Magnum Peg Mounts |
| For 84-16 FLHT/FLHR/FLTR/FLHX AND H-D TRIKE, 86-16 FLST MODELS AND 14-16 FLD Fully CNC-machined from solid 6061 T-6 billet aluminum Sold each Serrated foot area gives good "bite" to the bottom of the boot Measures 2.75" L x 4.5" W; .75" thick Super-strong yet very lightweight | Accept all standard male mount pegs 1/2"-13 threaded mount holes Sold in pairs |
$64.95 | $40.99 |
|
|
| Cruise Pegs for use with Fairing Lowers | Cruise Pegs for use with Fairing Lowers w/Dually Pegs |
For average riders (peg mounts 6" back from bar) Now you can easily mount cruise pegs on Dresser/Touring models with fairing lowers Special clamp interfaces with an offset arm to reach around the bike's lowers Sold in pairs | For tall riders (4" back from bar) Now you can easily mount cruise pegs on Dresser/Touring models with fairing lowers Special clamp interfaces with an offset arm to reach around the bike's lowers Sold in pairs |
$242.99 | $220.99 |
|
|
| Deep Cut Black Brake Arm for 00-10 FXST | Deep Cut Chrome Brake Arm for 08-13 FLT and H-D FL Trike |
| Available in Deep Cut style in standard length; standard length is 1" longer than stock Matching brake peg included Made in the U.S.A. Perfect match for Ness heel-toe shifter kits Carved from billet aluminum and available either chrome-plated or black anodized | Deep Cut style in standard length; standard length is 1" longer than stock Matching brake peg included Made in the U.S.A. Perfect match for Ness heel-toe shifter kits Carved from billet aluminum and chrome-plated |
$279.95 | $249.95 |
|
|
| Driver Floorbaord Extender Kit for 14-16 HD FL Trike models | Extended Instigator Driver Floorboards |
| Billet aluminum with a black finish Compatible with fairing lowers Kit is easy to install using included hardware Works well with oversized primary covers Made in the U.S.A. Kit moves the floorboards outward 11/4" Provides greater comfort by moving the legs away from the gas tank and engine heat | For 84-16 FLT/FLHT/FLHX/FLHR/FLTR, 86-16 FLST, 12-16 FLD Machined from 6061 T-6 billet aluminum Replace stock H-D® boards; mount like stock with stock hardware Driver floorboards are extended 21/2" in the front and rear and are 3/4" wider... |
$85.95 | $444.95 |
|
|
| Extended Instigator Passenger Floorboards | Floorboard Extension Kit |
| For 87-16 FLT/FLHT/FLHX/FLHR/FLTR, 86-16 FLST, 12-16 FLD Machined from 6061 T-6 billet aluminum Replace stock H-D® boards; mount like stock with stock hardware Driver floorboards are extended 21/2" in the front and rear and are 3/4" wider... | For 09-15 FLHT/FLHR/FLTR/FLHX CVO models Kit is designed to allow for better spacing between the rider floorboard, brake lever, and front exhaust down tube when using Vance & Hines full systems, Dresser Duals and Power Dual headpipe applications on CVO models |
$419.95 | $29.99 |
