Kuryakyn Products

For 00-07 FXST (except FXSTD) and 00-07 FLST (except Fat Boy and Deluxe) High-quality chrome metal covers Wrap around the front and rear edges of the frame for complete coverage Not for use with passenger floorboards

For 08-14 FLSTC, 08-09 FXSTB, 08-10 FXST/FXSTC, 10-12 FLSTSE Will fit 08-14 FLS, FLSTF, FLSTFB, FLSTN and FLSTSTB if OEM exhaust is removed and staggered duals or 2-into-1 system is installed High-quality chrome metal covers Wrap around the front...

Provide handy anchor points for securing luggage or other items Mounting hole accepts up to a 3/8" screw (M10 screw) Can also be used as a cable guide; replaces H-D OEM #38623-68

Greater surface area than any other pegs Sleek lines and thin profiles permit use in a variety of applications for driver or passenger Available with male mounts Sold in pairs

For 85-06 Softail, 91-06 FLHT/FLHR/FLTR/FLHX, 91-94 FXR, 91-06 XL Replacement spring adds a nice chrome accent Sold each

For 00-13 FLHT/FLHR/FLTR/FLHX Accents add style and protect the lower fork leg from road debris Includes fender boss covers for added style Require no tools to install Sold in pairs

Add brilliance to a dull area with these smooth, quickly installed covers that shroud the neck and extend down the frame Cover is enlarged enough on the right side to accommodate the in-line cruise control pull-off switch found on all Road King...

Add brilliance to a dull area with these smooth, quickly installed covers that shroud the neck and extend down the frame Cover is enlarged enough on the right side to accommodate the in-line cruise control pull-off switch found on all Road King...

For 92-16 FLT, FLHT, FLHX, FLTR and H-D FL Trike Direct replacement for the key lock fuel door latch Makes opening the cap just a simple push of the button

The easy way to add a touch of chrome to the front frame down tubes Simple snap-on installation Sold as a set

The easy way to add a touch of chrome to the front frame down tubes Simple snap-on installation Sold as a set

For 99-14 FLT/FLHR, FLTR, FLHX and Trikes Chrome-plated, stamped steel Covers both front and back Easy peel-and-stick installation

For 09-16 FLHT/FLHR/FLTR/FLHX AND 09-13 H-D FL TRIKES Move the stock driver's floorboards out 3/4" Help alleviate hot air buildup by moving the thighs/lower legs slightly away from the bike to improve airflow Mounts are powder-coated black...

Make a real statement with this fender ornaments Feature illuminating eyes Two-piece construction allows easy installation and bulb replacement Require 12V power source Fit most fenders

Flame design adds timeless style Chrome bodies with rubber flame inserts provide comfort and help isolate the foot from vibrations Sold Each NOTE: Will not fit 13-14 XL1200X/XL1200V/XL1200C models.

For 04-13 XL (except 09-13 883N, 08 XL1200R, 08-12 XL1200N, 10-13 XL1200X, 10-12 XR1200/X) An economical way to chrome the front fork lower legs Provide the improved handling associated with a fork brace Easy installation; no disassembly required

For 94-13 FLHR, FLHX, FLTR, FLHRSE AND FLHTCUSE (EXCEPT 07 FLHRSE) Chrome complement to the clean fender look on the Touring models Quick, simple installation with double-sided adhesive Sold each NOTE: Not for use on models with existing fender trim.

For 06-13 FLHX, 98-09 FLTR, 10-13 FLTRX, 11-13 FLTRU, 04-07 FLHRS, 04-05 FLHTCSE, 06-13 FLHTCUSE, 00-01/09 FLTRSE, 02-03/08 FLHRSE, 10-12 FLHXSE, 11-13 FLTRUSE and 10-13 H-D FL Trikes Sleek chrome strips are a quick, easy upgrade Sold in pairs

Add a splash of chrome Universal fit for most fenders; measures 11/4" W x 8" L Simple peel-and-stick application

Great way to cover dinged fender ends Easy installation: requires no drilling or tools Fit most OEM fenders

Great way to cover dinged fender ends Easy installation: requires no drilling or tools Fit most OEM fenders NOTE: Tip for narrow tire fender will not fit "full coverage" or skirted fenders.

Great way to cover dinged fender ends Easy installation: requires no drilling or tools Fit most OEM fenders

For 94-13 FLHR, FLHX, FLTR, FLHRSE AND FLHTCUSE (EXCEPT 07 FLHRSE) Chrome complement to the clean fender look on the Touring models Quick, simple installation with double-sided adhesive Sold each NOTE: Not for use on models with existing fender trim.

Improves access to the kickstand, can be used on almost any motorcycle Fully adjustable If used with Küryakyn's Driver Floorboard Kits, you can access the kickstand without having to fold up the floorboard Sold each

For all H-D Models with standard 3-Bolt Fender-Mounted License Plate Bracket Covers the exposed holes in the fender when the stock license plate bracket is removed Completely cover the "footprint" left by the stock mount Choose between the...

For 91-08 FLHTCU, FLTCU w/oil cooler, 03/07-08 FLHRSE, 04-05 FLHTCSE, 06-08 FLHTCUSE Shrouds the kickstand assembly, front engine stabilizer and footboard mount with beautiful chrome

• Brilliant chrome finish over sturdy aluminum construction
• All necessary mounting hardware included

Chrome-plated, die-cast construction Cover the ugly stock welds on frame Two-piece construction for easy installation Wiring modifications required on models using the plug-in-style ignition modules that mount on the frame neck

For 08-13 FLHT/FLHR/FLTR/FLHX, H-D FL Trike and 14-16 FLHR w/cable-operated clutch Design allows the forefinger to get a real grip, which makes it easier and more comfortable to pull the lever Lever backside is dished Hand falls naturally into...

For 96-17 models w/ cable clutch (except 15-17 Softail, 08-17 FLHT/FLHR/FLTR/FLHX/H-D FL Trike and 04-17 XL) Design allows the forefinger to get a real grip, which makes it easier and more comfortable to pull the lever Lever backside is dished...

Accept all standard male mount pegs 1/2"-13 threads Sold in pairs

For 98-13 FLTR, 04-10 XL883C, 1200C and custom applications Add a sleek appearance and reduce glare Fits speedometers and tachometers with a 33/4" o.d. and 7/16" exposed side wall in addition to applications listed Sold each

Chromed kickstand is super-strong and looks great Footpad design resists sinking into warm blacktop Easy to reach, even when running floorboards or aftermarket shifters Sold each

Sleek chrome accents are louvered to add flash and brilliance to the OEM swingarm Require no tools for installation Sold as a set

For 08-14 FXST/FLST (EXCEPT FXS, FLS, FLSTF, FLSTFB, FLSTN) Easy-to-install chrome covers offer an alternative to downtime and plating Lighted and unlighted versions available Both kits include four covers for tube section of swingarm, two upper...

For 00-07 FXST/FLST (EXCEPT 05-07 FLSTN, 07 FLSTF, 07 FXSTD) Chrome-plated covers accent the ends of the swingarm pivot shaft Sold in pairs

1200-denier nylon construction for durability Zippered ends and large hatch allow access to the main compartment from almost all sides Expandable side compartments provide extra room when needed Waterproof zippers with large, glove-friendly...

Uses Küryakyn's Magnum Quick Clamps and Clevis mounts for custom male-mount footpeg installation Ideal for use on engine guards Beautiful chrome finish Sold in pairs

Clamps to kickstands that measure 1/2"-3/4" in diameter Extends out either 27/8" or 43/8" Works with Honda VTX1300/1800 02-09 (all), Kawasaki VN1500/1600/2000 87-10/12 (all), Suzuki Boulevard C50/90 05-09 (all), Yamaha XVS650/1100 V-Star 98-12...

Features two USB ports and 2.1A output, enough to charge any modern device, even the iPad® Universal application, can be mounted to any 1" x 1" flat surface or 1" diameter handlebar/tubing (requires at least 1" L straight section to mount)...

Put them anywhere - peel-and-stick application Large medallions require 2" of flat surface for installation; are direct replacement emblems for Zombie saddlebag latch emblems Small medallions require 1" of flat surface for installation; are...

For 08-13 FLHT/FLHR/FLTR/FLHX Super-clean, one-piece design covers the entire assembly Simple, quick installation uses only two fasteners

For 99-07 FLT/FLTR/FLHT/FLHR and 00-01 Softail Super-clean, one-piece design covers the entire assembly Simple, quick installation uses only two fasteners

For 00-06 Softail, 99-06 FLHT/FLHR and FLTR, 99-05 FXDWG High-quality, chrome-plated, die-cast construction Smooths the transition from the cylinders to the engine cases Easy installation

For 07-14 FLHT/FLHR/FLTR and FLHX, 06-08 FXDWG High-quality, chrome-plated, die-cast construction Smooths the transition from the cylinders to the engine cases Easy installation

High-quality, chrome-plated, die-cast construction Smooths the transition from the cylinders to the engine cases Easy installation

For 07-08 FLHT/FLHR/FLTR/FLHX High-quality, chrome-plated, die-cast Precise fit and finished edges enhance the primary area Four mounting points for secure, quiet operation NOTE: Not for use with rear suspension lowering kits unless specified.

For 84-14 FLT/FLHT/FLHR/FLTR/FLHX AND 08-14 H-D TRIKES, 86-14 FLST Dress up the stock brake pedal Premium pedal pad has soft rubber inserts set in a chrome pedal cover Uses hidden fasteners for a clean look when installed

FOR 96-13 FLHT, FLHTC, FLHTCUI, FLHX AND H-D FL TRIKES Replace the stock wind deflectors found on Ultra Classic models Easy upgrade for the rest of the FLHT family as well Large surface area directs airflow better than other designs Close the...

Interchangeable ends allow use on early- or late-style footpeg mounts Hollow-core neoprene inserts are long lasting Dually peg measures 2-1/2" wide x 5" long Matching pegs and stirrups are available separately NOTE: ISO™-Pegs components are...

For 07-16 FLHT/FLHR/FLTR/FLHX, 09-16 H-D FL TRIKES, 06-16 DYNA AND 08-11 FXCW/C

For 83 and later screw-in style tanks (L96-14 tanks will require reusing the stock gas cap gasket) High-tech look of aviation-style fuel fillers Simply screws into the stock opening in your gas tank Keyed entry permits the low profile and...

For 83 and later screw-in style tanks (L96-14 tanks will require reusing the stock gas cap gasket) High-tech look of aviation-style fuel fillers Simply screws into the stock opening in your gas tank Keyed entry permits the low profile and...

Puts the finishing touch on your primary Covers the shift pivot area and grease fitting Easily installed

Feature super-comfortable ISO™-Ribs that run the full length of the board ISO™-Boards measure 15" overall length and offer several different foot positions for the driver Sold in pairs

For 84-14 models (except 08-14 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE) Billet aluminum construction Feature textured rubber inserts that provide long-ride comfort Sold in pairs

FOR: 82-13 Models (excpet 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE) Styled to match the popular ISO™-Pegs Dampen handlebar vibration while providing a sure grip Available in all chrome or gloss black

Interchangeable ends allow use on early- or late-style footpeg mounts Hollow-core neoprene inserts are long lasting NOTE: ISO™-Pegs components are not compatible with other footpegs such as the Soft-Ride style.

Add a heel rest to the popular ISO™-Peg system Give you floorboard comfort without the bulk Without footpegs to upgrade your existing ISO™-Peg system NOTE: Will not fit 13-14 XL1200V/Xl1200X/XL1200C models

Throttle Boss attaches to the end of the ISO™-Grips Small adjustable paddle is positioned under the palm of the hand Allows the rider to maintain a steady throttle position with a relaxed grip Redesigned rubber pad permits use on both grips...

Lets you know if your motorcycle's charging system is working with just a glance Green LED indicates normal operating range of 12.5 to 14.5V Amber LED warns the bike is not charging If reading drops below 10V or exceeds 15V, flashing red LED...

For L84-14 FXS/FXST, FXDWG, FXCW/C MODELS Complement the ISO™-Pegs footpeg Longhorn is 25% longer than standard version

Interchangeable ends allow use on early- or late-style footpeg mounts Hollow-core neoprene inserts are long lasting Longhorn peg measures 11/4" in diameter x 5-3/4" long Matching pegs and stirrups are available separately NOTE: ISO™-Pegs...

Super-tough, high-quality chrome mirrors Large mirrors have same square-inch as stock; small mirrors are 20% smaller Small Magnum mirrors have 51/2" stems with 5" x 23/4" mirror heads Large Magnum mirrors have 51/2" stems with 55/8" x 31/4"...

Super-tough, high-quality chrome mirrors Large mirrors have same square-inch as stock; small mirrors are 20% smaller Small Magnum Plus mirrors have 7" stems with 5" x 23/4" mirror heads Large Magnum Plus mirrors have 7" stems with 55/8" x 31/4"...

Super-tough, high-quality chrome mirrors Large mirrors have same square-inch as stock; small mirrors are 20% smaller Small Magnum Plus mirrors have 7" stems with 5" x 23/4" mirror heads Large Magnum Plus mirrors have 7" stems with 55/8" x 31/4"...

For 90-06 Big Twin and 88-06 XL models w/stock choke cables Chrome cover installs over the stock plastic knob Improves looks and is easier to use

Chrome-plated extenders attach to the handlebar like the stock mirrors Extend mirrors outward approximately 3" from the stock position For use with H-D mirrors with round steel stems Sold in pairs

Die-cast chrome cover dresses up the area between the cam cover and transmission Stock chrome oil lines exit through the cover for a high-tech appearance

For 84-99 80" Big Twins (single-terminal sending unit) High-quality, chromed, die-cast cover Requires the sending unit to be removed for installation For single-terminal gauge-style sending units Includes an upper and lower cover for complete coverage

The ultimate in comfort and style Combines the state-of-the-art vibration-absorbing properties of our standard ISO™-Grips with the fatigue-reducing comfort of our ISO™ Throttle Boss Grips have removable end caps so they can be used...

The ultimate in comfort and style Combines the state-of-the-art vibration-absorbing properties of our standard ISO™-Grips with the fatigue-reducing comfort of our ISO™ Throttle Boss Grips have removable end caps so they can be used...

Show-quality chrome finish Made from durable, flexible ABS Quick, simple installation Sold as a kit

Chrome-plated, die-cast cover beautifies the plain master cylinder Allows use of the OEM fluid level sight glass Features the Blood Groove design used on many Küryakyn accessories

Frame-mounted polycarbonate shields help beat engine heat Dissipate and re-direct engine heat away from the rider Make riding on those hot summer days bearable Sold in pairs

Frame-mounted polycarbonate shields help beat engine heat Dissipate and re-direct engine heat away from the rider Make riding on those hot summer days bearable Sold in pairs

Frame-mounted polycarbonate shields help beat engine heat Dissipate and re-direct engine heat away from the rider Make riding on those hot summer days bearable Sold in pairs

Frame-mounted polycarbonate shields help beat engine heat Dissipate and re-direct engine heat away from the rider Make riding on those hot summer days bearable Sold in pairs

Frame-mounted polycarbonate shields help beat engine heat Dissipate and re-direct engine heat away from the rider Make riding on those hot summer days bearable Sold in pairs

Beautifully sculpted set of levers adds a unique accent to your bike Very comfortable on the hands Chrome finish Sold in pairs FOR: 97-13 H-D Models w/Cable-Operated Clutch (except 08-13 FLHT/FLHR/FLTR/FLHX, H-D FL Trike and 04-13 XL)

Interchangeable ends allow use on early- or late-style footpeg mounts Hollow-core neoprene inserts are long lasting Small peg measures 11/4" in diameter x 4-5/8" long Matching pegs and stirrups are available separately NOTE: ISO™-Pegs...

For 84-13 FLT, FLHT, FLHR, FLTR, H-D FL TRIKE AND FLST MODELS (EXCEPT 04-07 FLHRS/SI) (+1" WIDER THAN STOCK) Complement the ISO™-Pegs footpeg Longhorn is 25% longer than standard version

Standard brake pedal pad for L84-14 FXS/FXST, FXDWG, FXCW/C MODELS

Can be installed without tools or removing any part of the dash Lightweight ABS construction with a chrome finish

Replace the existing caps on Küryakyn's ISO™-Grips Screws supplied for use with or without ISO™ Throttle Boss Sold in pairs

Switch panel accent adds an attractive chrome accent around the ignition and adjacent control switches; simple peel-and-stick application 4-piece switch panel/fork accent set available for FLTR models

For 07-08 FLHT/FLHR/FLTR/FLHX w/true dual head pipes High-quality, show-chromed, die-cast construction Easy to install and really highlights the right side of the engine Install in minutes One-piece design

Design allows the forefinger to get a real grip, which makes it easier and more comfortable to pull the lever. Sold in sets of one clutch and one brake lever.

Sturdy, chrome-plated mount accepts Küryakyn Silver Bullets or any other custom lights using 5/16" mounting hardware Order based on fork tube size- 41MM or 54-58MM Sold in pairs

Mounts to frame tube, engine guard or other tube bar Chrome finish Sold each NOTE: Works best on 2-1/4" L section of straight tube.

Mounts to frame tube, engine guard or other tube bar Chrome finish Sold each NOTE: Works best on 2-1/4" L section of straight tube.

Mount fits most luggage racks or any 1/2" diameter round tubing Angle of flag pole is vertical (non-adjustable) Includes 6" x 11" American flag

x-tension peg mounts only sold as a pair Fine tune your riding position Allow the rider to increase or decrease the reach to the highway peg Peg mounts only will accept any H-D style male mount footpeg Peg mounts only mount with 1/2"-13 bolt

For 91-14 H-D Big Twin w/stock cowbell horn Uses multi-color LEDs to give the chrome skull's eyes and nose endless depth Seven-color LEDs (red, lime, ice blue, sky blue, dark blue, purple or green) can be set for steady illumination, flashing, or...