New Products!!

Features a three-position switch (on/off/reserve) Chrome plated with filter screen Has a 1/4" fuel outlet; available in straight or 90° style Sold each

Wind tunnel designed and tested, the "hips" provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields Lexan® Polycarbonate with FMR hard...

For 86-16 FLT, FLHT, FLHR, FLHX, FLTR, FLSTC, FLSTF Made from forged aluminum, these boards are CNC milled for unparalleled strength and durability Finished with brilliant chrome Each board utilizes Big Bike Parts® anti-rotation mount system...

Include a set of S&S Shovelhead-style cylinder heads, a pair of S&S stock bore cylinders (3-7/16" for 74" engines), forged 8:1 compression pistons complete with rings and wrist pins, manifold clamps, manifold seals, all required hardware,...

Repl. OEM #60665-99, #60507-77 Die-cast outer primary cover with a satin black finish Hardware and bushing not included NOTE: Starter shaft bearing must be purchased separately.

For 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE, 14-16 FLHR (EXCEPT MODELS W/ HYDRAULIC CLUTCH) Patent Pending Adjustable Levers for V-Twins Easily adjust lever to bar reach for individual riders CNC Machined from high quality aluminum Available...

For 96-16 BIG TWIN (EXCEPT 15-16 SOFTAIL, 08-16 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE), 96-03 XL Patent Pending Adjustable Levers for V-Twins Easily adjust lever to bar reach for individual riders CNC Machined from high quality aluminum Available...

Patent Pending Adjustable Levers for V-Twins Easily adjust lever to bar reach for individual riders CNC Machined from high quality aluminum Available in black, chrome, or contrast black Lever sets sold in pairs

For 99-17 Big Twin (except 16-17 Dressers, 15 FLHTCUL/FLHTKL) High-quality covers that scream "custom" Constructed of 6061 T-6 aluminum Available in two distinct styles with a choice of finish: chrome or black-anodized with re-machined accents...

Machined from 6061 T-6 billet aluminum Replaces the stock H-D arm; mount like stock and include a decorative cap to conceal the mounting hardware Brake arm is 9 3/4" from center of pivot to center of toe peg Diamond and Slotted designs available...

Machined from 6061 T-6 billet aluminum Replaces the stock H-D arm; mount like stock and include a decorative cap to conceal the mounting hardware Brake arm is 9 3/4" from center of pivot to center of toe peg Diamond and Slotted designs available...

Fit OEM bumper (trunk guard) Fitted with molded rubber inserts to ensure a snug, secure fit Hide the welds where the brackets attach to the rear frame tubing Sold in pairs

Enhances the look of the trunk/rear wheel area Install using 3M VHB Sold in pairs

For 15 FXSB/FLS/FLST MODELS (CLUTCH ONLY) Faithful reproduction of the original clamp halves that secure the handlebar master cylinder or clutch control Die-cast aluminum construction Available in chrome or black Sold each

For 15 Softail, 08-15 FLHT/FLHR/FLHX/FLTR and 09-13 H-D FL TRIKE W/MECHANICAL CLUTCH Made of die-cast aluminum Available in black or chrome Sold each

Made of die-cast aluminum Available in black or chrome Sold each

For 08-15 FLHT/FLHX/FLHR/FLTR/H-D FL TRIKE MODELS AND OTHER MODELS W/THROTTLE-BY-WIRE CONTROLS Custom-tailored rubber-covered billet-aluminum grips Available for both cable- and Throttle-By-Wire applications Looks great with the matching Cobra...

For 82-15 MODELS (EXCEPT 08-15 DRESSERS, H-D FL TRIKES AND OTHER MODELS W/THROTTLE-BY-WIRE CONTROLS) Custom-tailored rubber-covered billet-aluminum grips Available for both cable- and Throttle-By-Wire applications Looks great with the matching...

The perfect start for any project bike or OEM model re-wire Complete bike harness w/ starter relay, 3-circuits, self-canceling and run, brake and turn signal module Works with any stand alone, Evo or Twin Cam ignition system Designed to operate...

For 11-16 FXST/FLST, 12-16 FXD/FXDWG, 14-16 XL, 14-16 FLHT/FLHR/FLHX/FLTR (EXCEPT CVO MODELS W/O BULLET-STYLE TURN SIGNALS) Each kit Includes pair of amber/white front LED turn signals, pair of red rear LED turn signals and Smart Signal...

For 14-16 FLHT, FLHR, FLTRX, FLHX AND H-D FL TRIKE CNC-machined from 6061 T-6 aluminum Available in chrome or black anodized in stock or +2" extended length Designed to match Eddie Trotta Exhaust Tips Sold in pairs Made in the U.S.A.

For 14-16 FLHT/FLHR/FLHX/FLTRX MODELS CNC-machined from 6061 billet aluminum; available in either chrome or black anodized finish Feature a back-cut design with diamond-cut center Replace stock faceplates on Touring models with hard bags Retain...

For 97-07 FLHR, 06-07 FLHX (except FLHRS); 12"W front, 7"W rear Exclusive controlled-density formula, precision-molded seat padding Expanded vinyl seat material with single-stitch diamond pattern Has a low look but still provides excellent back...

For 08-14 FLHT/FLHR/FLTR/FLHX; 12"W front, 7"W rear Exclusive controlled-density formula, precision-molded seat padding Expanded vinyl seat material with single-stitch diamond pattern Has a low look but still provides excellent back support Made...

For 06-10 FXST, 07-14 FLSTF/FLSTFB, 08-11 FLSTSB; 12"W front, 7"W rear Exclusive controlled-density formula, precision-molded seat padding Expanded vinyl seat material with single-stitch diamond pattern Has a low look but still provides excellent...

For 97-07 FLHT, FLTR; 12"W front, 7"W rear Exclusive controlled-density formula, precision-molded seat padding Expanded vinyl seat material with single-stitch diamond pattern Has a low look but still provides excellent back support Made in the...

For 14-16 FLHT/FLHR/FLHX/FLHTCUTG MODELS CNC-machined from billet aluminum Fits over the existing switch knob and securely attaches with two-sided tape (included) Made in the U.S.A.

Feature a hand-spun 53/8" polished aluminum cover with a high-quality element for high flow as well as superior protection from dust and dirt Include a black powder-coated backing plate and all necessary mounting hardware Made in the U.S.A. NOTE:...

Hold virtually any can, bottle or cup secure with a contoured rubber net Infinite adjustment with a Ciro ball-mount design Rubber-lined ring keeps your can or bottle from vibrating Soft rubber net won't scratch if it comes in contact with paint

Extension makes hard-to-reach kickstands easier to operate Include mounting hardware NOTE: Drilling required.

Extension makes hard-to-reach kickstands easier to operate Include mounting hardware NOTE: Drilling required.

For 14-15 FLHT, FLHR, FLTRX, FLHX & H-D FL TRIKE 6061 billet aluminum construction with chrome or black-anodized finishes Easily create a custom look by replacing the factory stock fork slider covers Covers complete the Elite line of products...

For 14-15 FLHT/FLHR/FLHX/FLTRX MODELS Constructed of 6061 T-6 aluminum Easy installation Made in the U.S.A. Available in chrome or black-anodized with re-machined accents

For 14-17 FLHT/FLTR/FLHX AND H-D FL TRIKE CNC-machined from billet aluminum Fits over the existing switch knob and securely attaches with two-sided tape (included) Made in the U.S.A.

The exact same assembly used in S&S production engines Can be used to overhaul an S&S engine or to build a custom engine using similar crankcases and pistons Features 4.25" stroke and an 8.5" diameter Made in the U.S.A.

For Stock or Performance Machine Calipers Artfully sculpted from heat-treated billet aluminum Machined PM icon logo with a pin-stripe detail that extends the length of the fork legs, and a hidden-axle design Kits include axle, axle covers, left...

For 14 FLHT/FLHR/FLHX MODELS Artfully sculpted from heat-treated billet aluminum Available in single disc or dual disc in chrome and Contrast Cut™ finishes Kits include axle, axle covers, left and right legs with caliper and fender mounts...

Available in chrome, Contrast Cut™ or Black Ops™ finish Black Ops finish features a gloss black on top of a contrasting textured black for outstanding durability and good looks Contrast Cut finish starts with a slider cover that has...

For 94-13 FLHR, FLHX, FLTR, FLHRSE and FLHTCUSE (except 07 FLHRSE) Bring a nostalgic look to the front fender with this form-fitted contoured ABS chrome accent Easily attaches with double-sided tape

For 14-15 FLHR/FLHTCU/FLHTK Direct replacement for stock Amber LED with an amber or smoke lens Gloss black finish

For 07-14 FLT/FLHT/FLHR/FLTR/H-D FL Trike; 06-14 FXD, FXDWG; 07-14 FXST/FLST Made from die-cast zinc Mounts with existing hardware NOTE: Not for use with hydraulic clutch.

For 84-15 FLHT/FLHX/FLHR/FLTR, 86-15 FLST Machined from 6061 T-6 billet aluminum Heel-toe shift arm kit replaces the stock H-D shift arms; mounts and adjusts like stock but conceals the shift shaft Toe shifter is 8 1/4" and heel shifter is 8"...

Available in three styles (Hole Shot, Scallop, Merc) and three finishes (chrome, Black Ops™ and Contrast Cut™) to choose from Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking...

CNC laser cut from 6061 T-6 aluminum Available in three finishes (chrome, Black Ops™ and Contrast Cut™) to choose from Contrast Cut™ starts with a polished cover that has been black anodized, then recut to open up the design...

For 07-14 Softail, 06-14 Dyna, 07-13 FL Touring w/H-D Six-Speed Transmissions Billet cover is used when converting from a cable clutch to hydraulic clutch Hydraulic clutch line must be purchased separately Include an upgraded throw-out bearing; a...

High-quality OEM replacement component; repl. OEM #32402-83 Comes with bolt and washer

For 08-14 FLHT/FLHR/FLHX/FLTR/H-D TRIKE MODELS The ultimate combination of performance and design for your V-Twin engine Inverted pleated top with pleated sides to maximize airflow Our pre-oiled black filter element is encapsulated in a stainless...

Will fit 88-90 models also, breather system is not applicable for these model years. The ultimate combination of performance and design for your V-Twin engine Inverted pleated top with pleated sides to maximize airflow Our pre-oiled black filter...

For 99-06 Twin Cam CV Carb, 01-14 Twin Cam Delphi EFI Models (except 08-14 FLHT/FLHR/FLHX/FLTR/H-D TRIKE) The ultimate combination of performance and design for your V-Twin engine Inverted pleated top with pleated sides to maximize airflow Our...

Styled low and narrow with a cut-down rear profile perfect for the rider seeking a low fit without compromising comfort Designed with IST seating technology engineered to reduce the vibration, compression and shock the body feels from riding to...

10" illuminating plasma rods with smoke lens Almost invisible when off Dual intensity 4-wire design Include 3M™ adhesive, promoter and posi taps Sold in pairs Work on all 12V DC negative ground systems

Available in three styles (Hole Shot, Scallop, Merc) and three finishes (chrome, Black Ops™ and Contrast Cut™) to choose from Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking...

CNC laser cut from 6061 T-6 aluminum Available in three finishes (chrome, Black Ops™ and Contrast Cut™) to choose from Contrast Cut™ starts with a polished cover that has been black anodized, then recut to open up the design...

Mirror face measures approximately 3-1/2" x 5-1/2" Short (4" L) or long (5" L) stem lengths available Chrome or matte black finish Include all necessary mounting hardware Sold in pairs

OEM style side fill design Repl. OEM #62491-95 Available in gloss black finish Includes oil filler plug Approx. 3 quarts

For 95-15 FLT, FLHT, FLHX, FLTR, FLHR MODELS Massive 4.5" diameter slip-on mufflers are finished with Destroyer (inside machined) style equally large new-style CNC machined billet end caps Slip-ons feature a big deep-toned rumble thanks to their...

For 95-15 FLT, FLHT, FLHX, FLTR, FLHR MODELS Massive 4.5" diameter slip-on mufflers are finished with Destroyer (inside machined) style equally large new-style CNC machined billet end caps Slip-ons feature a big deep-toned rumble thanks to their...

For 95-15 FLT, FLHT, FLHX, FLTR, FLHR MODELS Massive 4.5" diameter slip-on mufflers are finished with Raider (outside fluted) style equally large new-style CNC machined billet end caps Slip-ons feature a big deep-toned rumble thanks to their...

For 15-16 FLS/FLSTC/FLSTN, 14-16 XL1200C/V/T, 883L (repl. OEM #41500022) Drilled for better heat dissipation and faster braking in wet weather Designed for use with OEM and most aftermarket calipers 11.8" diameter Sold each

for 06-15 Dyna models (except 12-15 FLD AND 14-15 FXDL) Crossover connection connects the front and rear pipes, increases high rmp power Exclusive baffles, aggressive sound and performance Spherical exhaust port connectors, provides a leak-free...

For 07-14 V-ROD VRSCA/D/DX/CX AGM (Absorbed Glass Mat) separators with superior grid and component designs allow Drag Specialties to offer one of the most powerful batteries in the industry Improved charge recover capability from a deeply...

AGM (Absorbed Glass Mat) separators with superior grid and component designs allow Drag Specialties to offer one of the most powerful batteries in the industry Improved charge recover capability from a deeply discharged condition Longer shelf...

For 97-14 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKES AGM (Absorbed Glass Mat) separators with superior grid and component designs allow Drag Specialties to offer one of the most powerful batteries in the industry Improved charge recover...

Powdercoated, marine-grade aluminum construction with stainless steel components and high-strength composite Designed with spring-loaded X-Grip® technology; features an ‘X’ design that expands and contracts to secure nearly any...

Brilliant chrome or gloss black finish for show-bike looks Made of durable 4130 chromoly Rear bars are 7/8" in diameter Made in the U.S.A. CAUTION: Highway bars are designed for appearance only and may provide only a small amount of protection...

For 91-05 FXD/FXDWG W/FORWARD OR MID CONTROLS Stepped headers merge into a true reverse-cone megaphone muffler 13/4" headpipe steps up to 17/8" into the collector to increase flow and improve performance 4" muffler body features black billet end...

For 14-16 FLHT/FLHR/FLHX/FLTRX MODELS CNC-machined from 6061 billet aluminum; available in either chrome or black anodized finish Feature a back-cut design with diamond-cut center Replace stock faceplates on Touring models with hard bags Retain...

For 08-13 FLHT/FLHR/FLTR/FLHX, H-D FL Trike and 14-16 FLHR w/cable-operated clutch Design allows the forefinger to get a real grip, which makes it easier and more comfortable to pull the lever Lever backside is dished Hand falls naturally into...

For 96-17 models w/ cable clutch (except 15-17 Softail, 08-17 FLHT/FLHR/FLTR/FLHX/H-D FL Trike and 04-17 XL) Design allows the forefinger to get a real grip, which makes it easier and more comfortable to pull the lever Lever backside is dished...

Available in three styles (Hole Shot, Scallop, Merc) and three finishes (chrome, Black Ops™ and Contrast Cut™) to choose from Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking...

CNC laser cut from 6061 T-6 aluminum Available in Chrome or Contrast Cut finish Contrast Cut™ starts with a polished cover that has been black anodized, then recut to open up the design Chrome plated mounting hardware included Made in the U.S.A.

4" diameter muffler bodies Provide gains of up to 47% cfm airflow increase compared to the stock mufflers Maintain the stock ground clearance throughout the entire length of the muffler bodies Weigh 4 lb. less than stock High luster chrome or...

Provide a classic dual-exit look while increasing performance 13/4" header pipes provide improved exhaust flow; rear headpipe is not flattened to clear the coil bracket Removable louvered baffles increase back pressure and torque 21/2" heat...

CNC machined out of 6061 aluminum Available in black anodized or raw machined finish Racing-inspired design, these male mount toe pegs were made for the street or track With stainless steel clevis, these footpegs are adjustable for any angle Toe...

For 06-16 FXDB/FXDC/FXDL/FXDF/FXDWG (repl. OEMs #42040-06, 467170-10) Ground finish Drilled for better heat dissipation and consistent braking in wet weather Designed for use with OEM calipers and most aftermarket calipers 11.8" diameter Sold each

Forty spoke star hub wheel assemblies have that old school look and easy accessibility that make them a custom builders dream Feature 3/4" sealed roller bearings installed in a special .86" narrower hub than stock for USE IN Paughco narrow...

For 106" Motors (4-1/2" Stroker Kit) S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin Flywheel assemblies are designed for use with OEM-style roller sprocket...

For 124" Motors (4-1/2" Stroker Kit) For 06 Dynas and 07-16 Twin Cam "A" with Timken-style left main bearing S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin...

For 124" Motors (4-1/2" Stroker Kit) For 99-06 Twin Cam "A" with Timken-style left main bearing S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin Flywheel...

Each carb kit includes an S&S Super E or Super G gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold (unless noted), mounting hardware, fuel line, clamps, overflow line, one extra...

Includes manifold Each carb kit includes an S&S Super E or Super G gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold, mounting hardware, fuel line, clamps, overflow line, one extra...

Each carb kit includes an S&S Super E or Super G gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet...

Each carb kit includes an S&S Super E gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main...

Manifold not included Each carb kit includes an S&S Super E or Super G gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, mounting hardware, fuel line, clamps, overflow line, one extra...

Each carb kit includes an S&S Super E gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main...

Each carb kit includes an S&S Super E gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main...

Manifold not included Kit includes an S&S Super E gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two...

CALL FOR OUR PRICE For 99-06 Twin Cam (except 06 Dyna) (A motor) Long block features Super Stock heads and crankcase S&S easy start cams High-flow oil pump Forged 9.8:1 flat top pistons 4-1/8" bore x 4-1/8" stroke Intake system not included;...

For 98-13 FLHT/FLHX, 09-13 FLHTCUTG/FLHXXX Allows passing lamps to remain lit when the high beam is in use Plug-and-play installation Required when using Küryakyn Phase 6 or Phase 7 LED headlamp/passing lamps Sold each

Allows passing lamps to remain lit when the high beam is in use Plug-and-play installation Required when using Küryakyn Phase 6 or Phase 7 LED headlamp/passing lamps Sold each

Made of 9/16" square steel bar Available in 18" and 30" Bars fit into side plates with 11" width Come in black or chrome

CALL FOR OUR PRICE For 84-99 H-D BIG TWIN MODELS (CARBURETED) 3-1/2" x 4-1/4" bore and stroke S&S standard oil pump Stock-height basic engine is direct bolt in replacement for aging 80" H-D Evolution engines 508 cam with performance valve...

CALL FOR OUR PRICE For 84-99 H-D BIG TWIN MODELS (CARBURETED) 3-1/2" x 4-1/4" bore and stroke S&S standard oil pump Stock-height basic engine is direct bolt in replacement for aging 80" H-D Evolution engines 508 cam with performance valve...

For 14-15 FLHT/FLHTC/FLHTCU/FLHX and FLHTCUTG Models 6061 aluminum construction is available in either chrome or black-anodized finishes Replaces stock trim on models listed Made in the U.S.A.

Direct OEM replacement for H-D® radio antennas 14" L and screws into OEM antenna mounts Not intended to replace CB antenna